Specifications
Intel
®
Solid-State Drive DC P3700 Series
Product Specification July 2014
14 330566-002US
Shock and Vibration
Range
Shock
5
Operating
Non-operating
50 G Trapezoidal, 170 in/s
50 G Trapezoidal, 170 in/s
1,000 G (Max) at 0.5 msec
1,000 G (Max) at 0.5 msec
Vibration
6
Operating
Non-operating
2.17 GRMS (5-700 Hz) Max
3.13 G
RMS
(5-800 Hz) Max
2.17 GRMS (5-700 Hz) Max
3.13 G
RMS
(5-800 Hz) Max
Notes:
1. Operating temperature implies ambient air temperature under defined airflow in Tables 12 and 13.
2. 0-55
o
C is for airflow from the server towards the card and 0-40
o
C is for airflow into the server.
3. Please contact your Intel representative for details on the non-operating temperature range.
4. Temperature gradient measured without condensation.
5. Shock specifications assume the SSD is mounted securely with the input vibration applied to the drive-
mounting screws. Stimulus may be applied in the X, Y or Z axis. Shock specification is measured using
Root Mean Squared (RMS) value.
6. Vibration specifications assume the SSD is mounted securely with the input vibration applied to the drive-
mounting screws. Stimulus may be applied in the X, Y or Z axis. Vibration specification is measured using
RMS value.
Table 12: Airflow Requirements for Intel
®
SSD DC P3700 Series (Add-In Card)
Airflow
Direction
Unit
Ambient
Temperature
Intel
®
SSD DC P3700 Series
400GB
800GB
1.6TB
2TB
Towards the
server
LFM
40
o
C
200
300
300
300
Out of the
server
LFM
55
o
C
200
300
300
300
NOTE: For Add-In cards airflow can be for both the directions. Airflow specified is based on approach velocity.
Table 13: Airflow Requirements for Intel
®
SSD DC P3700 Series (2.5-inch Form Factor)
Airflow
Definition
Unit
Ambient
Temperature
Intel
®
SSD DC P3700 Series
400GB
800GB
1.6TB
2TB
Airflow Along
Drive
1
LFM
35
o
C
300
500
650
650
LFM
25
o
C
250
350
450
450
Approach
Airflow
2
LFM
35
o
C
70
120
155
155
LFM
25
o
C
60
85
110
110
NOTE:
1. It is recommended that airflow for 2.5-inch form factor should be towards the server, from the non-
connector side to the connector side. Airflow is specified across the surface of the drive. Spacing between
two SSDs is assumed to be 3mm.
2. The approach velocity of the airflow will be less than the airflow along the surface. Approach area
of 1.35 ft
2
is assumed.