Intel® Desktop Board DG43GT Product Guide Order Number: E68221-001
Revision History Revision -001 Revision History First release of the Intel® Desktop Board DG43GT Product Guide Date June 2009 If an FCC declaration of conformity marking is present on the board, the following statement applies: FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules.
Preface This Product Guide gives information about board layout, component installation, BIOS update, and regulatory requirements for Intel® Desktop Board DG43GT. Intended Audience The Product Guide is intended for technically qualified personnel. It is not intended for general audiences. Use Only for Intended Applications All Intel Desktop Boards are evaluated as Information Technology Equipment (I.T.E.
Intel Desktop Board DG43GT Product Guide Terminology The table below gives descriptions of some common terms used in the product guide.
Contents 1 Desktop Board Features Desktop Board Components.................................................................................11 Online Support ..................................................................................................13 Processor..........................................................................................................13 Main Memory.....................................................................................................
Intel Desktop Board DG43GT Product Guide Installing the I/O Shield ......................................................................................29 Installing and Removing the Desktop Board ...........................................................30 Installing and Removing a Processor .....................................................................31 Installing a Processor ..................................................................................
Contents B Regulatory Compliance Safety Standards ...............................................................................................69 Place Battery Marking .................................................................................69 European Union Declaration of Conformity Statement..............................................70 Product Ecology Statements ................................................................................71 Recycling Considerations .......................
Intel Desktop Board DG43GT Product Guide Tables 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. viii Feature Summary.......................................................................................... 9 Intel Desktop Board DG43GT Components .......................................................12 Back Panel and Front Panel Audio Jack Retasking Support ..................................17 LAN Connector LEDs .........................................................
1 Desktop Board Features This chapter briefly describes the features of Intel® Desktop Board DG43GT. Table 1 summarizes the major features of the board. Table 1. Feature Summary Form Factor microATX (243.84 millimeters [9.60 inches] x 243.84 millimeters [9.60 inches]) Processor Support for an Intel® processor in the LGA775 package Main Memory • Four 240-pin, DDR2 1.
Intel Desktop Board DG43GT Product Guide Table 1. Feature Summary (continued) Peripheral Interfaces • Twelve USB 2.0 ports: ― Six ports routed to the back panel ― Six ports routed to three front panelUSB headers • Two IEEE 1394a ports: ― One port routed to the back panel ― One port routed to an onboard header • Four Serial ATA (SATA) channels (3.
Desktop Board Features Desktop Board Components Figure 1 shows the approximate location of the major components on Intel Desktop Board DG43GT. Figure 1.
Intel Desktop Board DG43GT Product Guide Table 2.
Desktop Board Features Online Support For more information on Intel Desktop Board DG43GT consult the following online resources: • Intel Desktop Board DG43GT http://www.intel.com/products/motherboard/DG43GT/in dex.htm • Desktop Board support http://support.intel.com/support/motherboards/desktop /DG43GT • Available configurations for Intel Desktop Board DG43GT http://www.intel.com/products/motherboard/DG43GT/in dex.htm • Supported processors http://processormatch.intel.
Intel Desktop Board DG43GT Product Guide Main Memory NOTE To be fully compliant with all applicable Intel ® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation.
Desktop Board Features Intel® G43 Express Chipset The Intel G43 Express Chipset consists of the following devices: • • Intel G43 Express Chipset Graphics and Memory Controller Hub (GMCH) with Direct Media Interface (DMI) Intel 82801JIB I/O Controller Hub (ICH10) with DMI The GMCH component provides interfaces to the processor, memory, PCI Express, and the DMI interconnect. The GMCH also provides integrated graphics capabilities supporting 3D, 2D, and display capabilities.
Intel Desktop Board DG43GT Product Guide • Advanced display support, including: ⎯ DVI specification 1.0 compliant ⎯ Dual independent display support via the DVI-I and HDMI back panel connectors ⎯ High Definition Content Protection (HDCP) version 1.
Desktop Board Features Audio Subsystem The onboard audio subsystem consists of the following: • • • • • Intel ICH10 I/O controller hub Realtek ALC888S 10-channel audio codec Front panel audio header with support for: ⎯ Intel® High Definition Audio ⎯ AC ’97 Audio Onboard 4-pin S/PDIF output header Back panel audio connectors including an optical S/PDIF output connector The audio subsystem supports the following features: • • A signal-to-noise (S/N) ratio of 95 dB Independent multi-streaming 7.
Intel Desktop Board DG43GT Product Guide Legacy Input/Output (I/O) Controller The legacy I/O controller provides the following: • • • • • • One serial port interface via an onboard header One parallel port interface via an onboard header One PS/2 port for keyboard or mouse support Serial IRQ interface compatible with serialized IRQ support for PCI systems Intelligent power management, including a programmable wake up event interface PCI power management support NOTE The PS/2 port supports both keyboard a
Desktop Board Features Table 4. LAN Connector LEDs LED LED Color LED State Indicates A (Link) Green Off LAN link is not established On LAN link is established Blinking LAN activity is occurring Off 10 Mb/s data rate B (Speed) N/A Green On 100 Mb/s data rate Yellow On 1000 Mb/s data rate For information about LAN software and drivers go to http://support.intel.com/support/motherboards/desktop Hi-Speed USB 2.0 Support The Desktop Board supports up to 12 USB 2.
Intel Desktop Board DG43GT Product Guide NOTE ATA-66 and ATA-100 are faster timings and require a specialized cable to reduce reflections, noise, and inductive coupling. The PATA interface also supports ATAPI devices (such as CD-ROM drives) and ATA devices using the transfer modes. The BIOS supports Logical Block Addressing (LBA) and Extended Cylinder Head Sector (ECHS) translation modes. The drive reports the transfer rate and translation mode to the BIOS.
Desktop Board Features BIOS The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, the PCI/PCI Express auto-configuration utilities, and the video BIOS. The BIOS is stored in the Serial Peripheral Interface (SPI) Flash device. The BIOS can be updated by following the instructions in Chapter 3. ATA Auto Configuration If you install a Serial or Parallel ATA device in your computer, the auto-configuration utility in the BIOS automatically detects and configures the device for your computer.
Intel Desktop Board DG43GT Product Guide Hardware Management Features The hardware management features of Intel Desktop Board DG43GT enable the board to be compatible with the Wired for Management (WfM) specification.
Desktop Board Features Power Management Features Power management is implemented at several levels, including: • • • Software support through the Advanced Configuration and Power Interface (ACPI) Hardware support: ⎯ Power connectors ⎯ Fan headers ⎯ LAN wake capabilities ⎯ Instantly Available PC technology (Suspend to RAM) ⎯ +5 V standby power indicator LED ⎯ Wake from USB ⎯ Wake from serial ⎯ Power Management Event signal (PME#) wakeup support ⎯ WAKE# signal wake-up support ⎯ Wake from PS/2 ENERGY STAR q
Intel Desktop Board DG43GT Product Guide Fan Headers The function/operation of the fans is as follows: • • • • The fans are on when the computer is in the ACPI S0 state. The fans are off when the computer is in the ACPI S3, S4, or S5 state. All fan headers support closed-loop fan control that can adjust the fan speed according to thermal conditions. All fan headers have a +12 V DC connection. The Desktop Board has a 4-pin processor fan header and two 3-pin chassis fan headers.
Desktop Board Features +5 V Standby Power Indicator CAUTION If the AC power has been switched off and the standby power indicator is still lit, disconnect the power cord before installing or removing any devices connected to the board. Failure to do so could damage the board and any attached devices. The Desktop Board’s standby power indicator, shown in Figure 3, is lit when there is standby power still present on the board even when the computer appears to be off.
Intel Desktop Board DG43GT Product Guide WAKE# Signal Wake-up Support When the WAKE# signal on the PCI Express bus is asserted, the computer wakes from an ACPI S1, S3, S4, or S5 state. Wake from PS/2 Activity on the PS/2 port wakes the computer from an ACPI S1 or S3 state. ENERGY STAR*, e-Standby, and EuP Compliance The US Department of Energy and the US Environmental Protection Agency have continually revised the ENERGY STAR requirements.
2 Installing and Replacing Desktop Board Components This chapter tells you how to: • • • • • • • • • • • • Install the I/O shield Install and remove the Desktop Board Install and remove a processor Install and remove memory Install and remove a PCI Express x16 card Connect the PATA (IDE) and SATA cables Connect to the internal headers Connect to the onboard audio system Connect chassis fan and power supply cables Set the BIOS configuration jumper Clear passwords Replace the battery Before You Begin CAUTIO
Intel Desktop Board DG43GT Product Guide Installation Precautions When you install and test the Desktop Board, observe all warnings and cautions in the installation instructions.
Installing and Replacing Desktop Board Components Installing the I/O Shield The Desktop Board comes with an I/O shield. When installed in the chassis, the shield blocks radio frequency transmissions, protects internal components from dust and foreign objects, and promotes correct airflow within the chassis. Install the I/O shield before installing the Desktop Board in the chassis. Place the shield inside the chassis as shown in Figure 4. Press the shield into place so that it fits tightly and securely.
Intel Desktop Board DG43GT Product Guide Installing and Removing the Desktop Board CAUTION Only qualified technical personnel should perform these procedures. Disconnect the computer from its power source before performing the procedures described here. Failure to disconnect the power before you open the computer can result in personal injury or equipment damage. Refer to your chassis manual for instructions on installing and removing the Desktop Board.
Installing and Replacing Desktop Board Components Installing and Removing a Processor This section contains information on how to install and remove a processor on the Desktop Board. Installing a Processor CAUTION Before installing or removing the processor, make sure the AC power has been removed by unplugging the power cord from the computer; the standby power LED should not be lit (see Figure 3 on page 25). Failure to do so could damage the processor and the board.
Intel Desktop Board DG43GT Product Guide 3. Lift the load plate (Figure 7, A). Do not touch the socket contacts (Figure 7, B). Figure 7. Lift the Load Plate 4. Remove the plastic protective socket cover from the load plate (Figure 8). Do not discard the protective socket cover. Always replace the socket cover if the processor is removed from the socket. Figure 8.
Installing and Replacing Desktop Board Components 5. Remove the processor from the protective processor cover. Hold the processor only at the edges, being careful not to touch the bottom of the processor (see Figure 9). Do not discard the protective processor cover. Always replace the processor cover if the processor is removed from the socket. Figure 9. Remove the Processor from the Protective Processor Cover 6. Hold the processor with your thumb and index fingers oriented as shown in Figure 10.
Intel Desktop Board DG43GT Product Guide 7. Pressing down on the load plate (Figure 11, A), close and engage the socket lever (Figure 11, B). Figure 11. Close the Load Plate Installing a Processor Fan Heat Sink Intel Desktop Board DG43GT has mounting holes for a processor fan heat sink. For instructions on how to attach the processor fan heat sink to the Desktop Board, refer to the boxed processor manual.
Installing and Replacing Desktop Board Components Connecting the Processor Fan Heat Sink Cable Connect the processor fan heat sink cable to the 4-pin processor fan header (see Figure 12). A fan with a 4-pin connector as shown in Figure 12, A is recommended; however, a fan with a 3-pin connector (Figure 12, B) can be used. However, since a fan with a 3-pin connector cannot use the onboard fan control, the fan will always operate at full speed. Figure 12.
Intel Desktop Board DG43GT Product Guide Installing and Removing Memory Intel Desktop board DG43GT has four 240-pin DDR2 DIMM sockets arranged as DIMM 0 and DIMM 1 in both Channel A and Channel B. NOTE Regardless of the memory configuration used (dual or single channel), Channel A, DIMM 0 must always be populated. This is a requirement of the ICH10 Manageability Engine feature.
Installing and Replacing Desktop Board Components If additional memory is to be used, install another matched pair of DIMMs in DIMM 1 (black) in channels A and B (see Figure 14). Figure 14. Dual Channel Memory Configuration with Four DIMMs Three DIMMs If you want to use three DIMMs in a dual-channel configuration, install a matched pair of DIMMs equal in speed and size in DIMM 0 (blue) and DIMM 1 (black) of channel A.
Intel Desktop Board DG43GT Product Guide Installing DIMMs To make sure you have the correct DIMM, place it on the illustration of the DDR2 DIMM in Figure 16. All the notches should match with the DDR2 DIMM. Figure 16.
Installing and Replacing Desktop Board Components To install a DIMM, follow these steps: 1. Observe the precautions in "Before You Begin" on page 27. 2. Turn off all peripheral devices connected to the computer. Turn off the computer and disconnect the AC power cord. 3. Remove the computer’s cover and locate the DIMM sockets (see Figure 17). Figure 17. Installing a DIMM 4. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position. 5.
Intel Desktop Board DG43GT Product Guide 7. Insert the bottom edge of the DIMM into the socket. 8. When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips snap into place. Make sure the clips are firmly in place. 9. Replace the computer’s cover and reconnect the AC power cord. Removing DIMMs To remove a DIMM, follow these steps: 1. 2. 3. 4. 5. Observe the precautions in "Before You Begin" on page 27. Turn off all peripheral devices connected to the computer.
Installing and Replacing Desktop Board Components Installing and Removing a PCI Express x16 Card CAUTION When installing a PCI Express x16 card on the Desktop Board, ensure that the card is fully seated in the PCI Express x16 connector before you power on the system. If the card is not fully seated in the PCI Express connector, an electrical short may result across the PCI Express connector pins.
Intel Desktop Board DG43GT Product Guide Removing the PCI Express x16 Card Follow these instructions to remove the PCI Express x16 card from the connector: 1. Observe the precautions in "Before You Begin" on page 27. 2. Remove the screw (Figure 19, A) that secures the card’s metal bracket to the chassis back panel. 3. Push the card ejector lever down using the tip of a pencil or similar tool (Figure 19, B) in the notch. This will release the card from the connector (C). 4. Pull the card straight up.
Installing and Replacing Desktop Board Components Connecting a PATA (IDE) Cable An IDE cable can be used to connect two IDE drives to the Desktop Board. The cable supports the ATA-66/100 transfer protocol. Figure 20 shows the correct installation of the cable. NOTES ATA-66/100 compatible cables are backward compatible with drives using slower IDE transfer protocols.
Intel Desktop Board DG43GT Product Guide Figure 20.
Installing and Replacing Desktop Board Components Connecting Serial ATA (SATA) Cables SATA cables support the Serial ATA (SATA) protocol. Each cable can be used to connect a single SATA drive to the Desktop Board. For correct cable function: 1. Observe the precautions in "Before You Begin" on page 27. 2. Attach one end the SATA cable to one of the SATA connectors on the board (Figure 21, A). 3. Attach the other end of the SATA cable to the SATA drive (Figure 21, B). Figure 21.
Intel Desktop Board DG43GT Product Guide Connecting to Internal Headers Before connecting cables to the internal headers, observe the precautions in “Before You Begin” on page 27. Figure 22 shows the location of the internal headers. Figure 22.
Installing and Replacing Desktop Board Components S/PDIF Header Figure 22, A shows the location of the S/PDIF header. Table 5 shows the pin assignments and signal names for the S/PDIF header. Table 5. S/PDIF Connector Signal Names Pin Signal Name 1 Ground 2 S/PDIF Out 3 Key (no pin) 4 +5 VDC Front Panel HD Audio Header The front panel audio header shown in Figure 22, B supports both Intel High Definition (HD) Audio and AC ’97 Audio.
Intel Desktop Board DG43GT Product Guide Serial Port Header See Figure 22, C for the location of the serial port header. Table 8 shows the pin assignments for the header. Table 8. Serial Port Header Signal Names Pin Signal Name Pin Signal Name 1 DCD 2 RXD# 3 TXD# 4 DTR 5 Ground 6 DSR 7 RTS 8 CTS 9 RI 10 No Connection Parallel Port Header See Figure 22, D for the location of the parallel port header. Table 9 shows the pin assignments for the header. Table 9.
Installing and Replacing Desktop Board Components Pin Standard Signal Name ECP Signal Name EPP Signal Name 24 GROUND GROUND GROUND 25 SELECT SELECT SELECT 26 KEY (no pin) KEY (no pin) KEY (no pin) IEEE 1394a Header See Figure 22, E for the location of the IEEE 1394a header. Table 10 shows the pin assignments for the header. Table 10.
Intel Desktop Board DG43GT Product Guide Alternate Front Panel Power LED Header Figure 22, G shows the location of the alternate front panel power LED header. Pins 1 and 3 of this header duplicate the signals on pins 2 and 4 of the front panel header. If your chassis has a three-pin power LED cable, connect it to this header. Table 12 shows the pin assignments for the alternate front panel header. Table 12.
Installing and Replacing Desktop Board Components Chassis Intrusion Header Figure 22, I shows the location of the chassis intrusion header. This header can be connected to a mechanical switch on the chassis to detect if the chassis cover is removed. Table 14 shows the pin assignments for the chassis intrusion header. Table 14.
Intel Desktop Board DG43GT Product Guide Connecting Chassis Fan and Power Supply Cables Chassis Fan Cables Connect chassis fan cables to the chassis fan headers on the Desktop Board. Figure 24 shows the location of the chassis fan headers. Figure 24.
Installing and Replacing Desktop Board Components Power Supply Cables CAUTION Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2 pin) power connector to the Desktop Board may result in damage to the board or the system may not function properly. The 2 x 12 pin main power connector on the Desktop Board is backwards compatible with ATX12V power supplies with 2 x 10 connectors. Figure 25 shows the location of the Desktop Board power connectors. Figure 25.
Intel Desktop Board DG43GT Product Guide Setting the BIOS Configuration Jumper NOTE Always turn off the power and unplug the power cord from the computer before moving the jumper. Moving the jumper with the power on may result in unreliable computer operation. Figure 26 shows the location of the Desktop Board’s BIOS configuration jumper block. Figure 26. Location of the BIOS Configuration Jumper Block The three-pin BIOS jumper block enables board configuration to be done in the BIOS Setup program.
Installing and Replacing Desktop Board Components Table 15. Jumper Settings for the BIOS Setup Program Modes Jumper Setting Mode Description Normal (default) (1-2) The BIOS uses the current configuration and passwords for booting. Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu. Use this menu to clear passwords. Recovery (None) The BIOS recovers data in the event of a failed BIOS update.
Intel Desktop Board DG43GT Product Guide 12. To restore normal operation, place the jumper on pins 1-2 as shown below. 13. Replace the cover, plug in the computer, and turn on the computer. Clearing CMOS Memory The Desktop Board provides a Clear CMOS jumper block that can be used to clear its CMOS Memory. Figure 27 shows the location of the jumper block; Table 16 shows the jumper settings. 1. Observe the precautions in "Before You Begin" on page 27. 2.
Installing and Replacing Desktop Board Components Figure 27. Location of the Clear CMOS Memory Jumper Block Table 16. Clear CMOS Jumper Settings Jumper Mode Description None Normal (default) The BIOS uses the current contents of the CMOS memory. Installed Clear The CMOS memory is erased. Replacing the Battery A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years.
Intel Desktop Board DG43GT Product Guide CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRÉCAUTION Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible.
Installing and Replacing Desktop Board Components PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. WAARSCHUWING Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij. Batterijen moeten zoveel mogelijk worden gerecycled.
Intel Desktop Board DG43GT Product Guide AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska.
Installing and Replacing Desktop Board Components OСТОРОГА Використовуйте батареї правильного типу, інакше існуватиме ризик вибуху. Якщо можливо, використані батареї слід утилізувати. Утилізація використаних батарей має бути виконана згідно місцевих норм, що регулюють охорону довкілля.
Intel Desktop Board DG43GT Product Guide To replace the battery, follow these steps: 1. Observe the precautions in "Before You Begin" (see page 27). 2. Turn off all peripheral devices connected to the computer. Disconnect the computer’s power cord from the AC power source (wall outlet or power adapter). 3. Remove the computer cover. 4. Locate the battery on the board (see Figure 28). 5. With a medium flat-bladed screwdriver, gently pry the battery free from its connector.
3 Updating the BIOS The BIOS Setup program can be used to view and change the BIOS settings for the computer. You can access the BIOS Setup program by pressing the key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. This chapter tells you how to update the BIOS by either using the Intel Express BIOS Update utility or the Iflash Memory Update utility, and how to recover the BIOS if an update fails.
Intel Desktop Board DG43GT Product Guide Updating the BIOS with the ISO Image BIOS Update File or the Iflash Memory Update Utility You can use the information in this section to update the BIOS using either the Iflash Memory Update Utility or the ISO Image BIOS update file. Obtaining the BIOS Update File You can update to a new version of the BIOS by using the ISO Image BIOS update file (recommended), or Iflash BIOS update file.
Updating the BIOS CAUTION Do not interrupt the process or the system may not function properly. Follow these instructions to upgrade the BIOS using the ISO Image BIOS file: 1. Download the ISO Image BIOS file. 2. Using software capable of uncompressing and writing an ISO image file to CD, burn the data to a blank CD. NOTE Copying the ISO Image BIOS file to CD will not work. The completed CD should contain multiple files and a directory. 3.
Intel Desktop Board DG43GT Product Guide CAUTION Do not interrupt the process or the system may not function properly. 1. Uncompress the BIOS update file and copy the .BIO file, IFLASH.EXE, and .ITK file (optional) to a bootable USB flash drive or other bootable USB media. 2. Configure the BIOS or use the F10 option during POST to boot to the USB device. 3. Manually run the IFLASH.EXE file from the USB device and manually update the BIOS.
A Error Messages and Indicators Intel Desktop Board DG43GT reports POST errors in two ways: • • By sounding a beep code By displaying an error message on the monitor BIOS Beep Codes The BIOS also issues a beep code (one long tone followed by two short tones) during POST if the video configuration fails (a faulty video card or no card installed) or if an external ROM module does not properly checksum to zero. Table 17 lists the BIOS codes. Table 17.
Intel Desktop Board DG43GT Product Guide 68
B Regulatory Compliance This appendix contains the following regulatory compliance information for Intel Desktop Board DG43GT: • • • • • Safety standards European Union Declaration of Conformity statement Product Ecology statements Electromagnetic Compatibility (EMC) regulations Product certifications Safety Standards Intel Desktop Board DG43GT complies with the safety standards stated in Table 19 when correctly installed in a compatible host system. Table 19.
Intel Desktop Board DG43GT Product Guide European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board DG43GT is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directives 2004/108/EC (EMC Directive) and 2006/95/EC (Low Voltage Directive).
Regulatory Compliance Malti Dan il-prodott hu konformi mal-provvedimenti tad-Direttivi Ewropej 2004/108/EC u 2006/95/EC. Norsk Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 2004/108/EC & 2006/95/EC. Polski Niniejszy produkt jest zgodny z postanowieniami Dyrektyw Unii Europejskiej 2004/108/EC i 2006/95/EC. Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC & 2006/95/EC.
Intel Desktop Board DG43GT Product Guide Deutsch Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das Intel Produkt-Recyclingprogramm implementiert, das Einzelhandelskunden von Intel Markenprodukten ermöglicht, gebrauchte Produkte an ausgewählte Standorte für ordnungsgemäßes Recycling zurückzugeben. Details zu diesem Programm, einschließlich der darin eingeschlossenen Produkte, verfügbaren Standorte, Versandanweisungen, Bedingungen usw., finden Sie auf der http://intel.
Regulatory Compliance Portuguese Como parte deste compromisso com o respeito ao ambiente, a Intel implementou o Programa de Reciclagem de Produtos para que os consumidores finais possam enviar produtos Intel usados para locais selecionados, onde esses produtos são reciclados de maneira adequada. Consulte o site http://intel.
Intel Desktop Board DG43GT Product Guide Lead-free 2LI/Pb-free 2LI Board The electronics industry is transitioning to European Union (EU) Restriction of Hazardous Substances (RoHS)-compliant products. The RoHS legislation restricts the use of six materials. One of these restricted materials is lead. Lead is the most common and problematic of the RoHS restricted materials. There are exemptions in RoHS that allow the use of lead in some very limited locations in electronic products.
Regulatory Compliance Table 20. Lead-Free Second Level Interconnect Marks Description Mark This symbol is used to identify electrical and electronic assemblies and components in which the Pb concentration level in the Desktop Board substrate and the solder connections from the board to the components (second-level interconnect) is not greater than 0.1% by weight (1000 ppm).
Intel Desktop Board DG43GT Product Guide China RoHS “China RoHS” is the term used by industry generally to describe legislation implemented by the Ministry of Information Industry (MII) in the People's Republic of China for the control of pollution by electronic information products (EIP). The official title of the China RoHS regulation is “Management Methods for Controlling Pollution by Electronic Information Products.” China RoHS bans the same substances and has the same limits as EU RoHS.
Regulatory Compliance The China MII stipulates that a material Self Declaration Table (SDT) must be included in a product’s user documentation. The SDT for Intel Desktop Board DG43GT is shown in Figure 29. Figure 29.
Intel Desktop Board DG43GT Product Guide EMC Regulations Intel Desktop Board DG43GT complies with the EMC regulations stated in Table 22 when correctly installed in a compatible host system. Table 22. EMC Regulations Regulation (Class B) Title FCC 47 CFR Part 15, Subpart B Title 47 of the Code of Federal Regulations, Part 15, Subpart B, Radio Frequency Devices. (USA) ICES-003 Issue 4 Interference-Causing Equipment Standard, Digital Apparatus.
Regulatory Compliance Korean Class B statement translation: This is household equipment that is certified to comply with EMC requirements. You may use this equipment in residential environments and other non-residential environments. Ensure Electromagnetic Compatibility (EMC) Compliance Before computer integration, make sure that the power supply and other modules or peripherals, as applicable, have passed Class B EMC testing and are marked accordingly.
Intel Desktop Board DG43GT Product Guide Product Certifications Board-Level Certification Markings Intel Desktop Board DG43GT has the product certification markings shown in Table 23. Table 23. Product Certification Markings Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel Desktop Boards: E210882. FCC Declaration of Conformity logo mark for Class B equipment. Includes Intel name and DG43GT model designation. CE mark.
Regulatory Compliance Chassis and Component Certifications Ensure that the chassis and certain components; such as the power supply, peripheral drives, wiring, and cables; are components certified for the country or market where used. Agency certification marks on the product are proof of certification. Typical product certifications include: In Europe The CE marking signifies compliance with all applicable European requirements.
Intel Desktop Board DG43GT Product Guide 82
