WHC report

Test Notes
Window 8 64-bit
USB3
Termination
10/01/2013 1407
Errata
The USB3 Termination test may fail to find the USB 3.0 (Super
Speed) device if the system's USB ports are not numbered
contiguously. While nearly all systems have contingous USB port
numbers, it is not technically required. If this filter allows the
FindUsb3Device task to pass, then HCK Errata ID 1407 can be
used in a Readme form to overturn the remaining cancelled
tasks.
Windows 8 64-bit
xHCI Debug
Capability
Compliance
(Logo)
07/31/2014 316
Contingenc
y
The XHCI Debug Capability Compliance Test will fail XHCI
controllers that do not provide the debug capability registers.
Operating System
Test
Description
Windows 7/8
BIOS
download
Internal: http://bios.intel.com/downloads/
External: http://www.intel.com/ click on Support and Download
Windows 7/8
BIOS setup Please make sure the BIOS setting are as below, otherwise use default
settings.
System Date and Time: Current date and time
Peripheral Configuration: Enable all onboard component
Drive Configuration: Set to AHCI
Boot Device Priority: set <Hard Disk Driver> to first
Enhance Consumer IR: Enable
Intel Rapidstart: Enable
Intel Smart Connect: Enable
TPM: Enable
UEFI Boot: Enabled
Windows 7/8 filter
update
WHCK WHQL
test
https://sysdev.microsoft.com/member/SubmissionWizard/LegalExemptions/HC
KFilterUpdates.cab
Special H/W that
use to PASS the
test
None
None