PLMP Report

Errata and Contingencies
Operating
System
Failing Test
Expiry Date
ID
Number
Type
Error Description
windows 7
Win7: PCI Hardware
Compliance Test For
Systems
12/01/2012
401
Erratum
Issue Description:
The following PCI Compliance test failure is
acceptable: Bit 15 (Bridge Configuration Retry
Enable) in the Device Control register (offset 8h) in
the PCI Express Capability table must be read-only
and always return 0 as it is reserved for devices
other than PCI Express to PCI/PCI-X Bridges.
Assertion 13A41D3E-2576-41DC-A67C-
525DA3637CEA This failure is acceptable because
this is a PCIe 1.1 feature and the WLP requires
compliance with only PCIe 1.0a.
1241
Issue Description:
Data Link Layer Link Active Reporting Capable bit is
set but Data Link Layer Link Active is not.
windows 7 -
64bit
923
Issue Description:
Bit range 15:0 (Extended Capability ID)in the
Enhanced Capability Header register (offset 0h) in
the Unrecognized Enhanced Capability ID 13 table
is Dh. It must be in the range [0x0 - 0xB] as all
other Capability IDs are reserved.
windows 7
Win7: UAA Test -
Win7 (System)
06/01/2015
513
Erratum
Issue Description:
UAA Test requires the Traffic Priority bit to be
read/write - however there are two specs that
apply, and they conflict. One says the bit must be
read/write, the other says it must be read-only.
Contact has been made with the author of both
specs (Intel) but until this point is clarified we
cannot fail submissions containing this test failure.
windows 7 -
64bit
windows 7
Win7:Class Driver
AC3 Test - Win7
06/30/2025
1256
Erratum
Issue Description: