PLMP Report

Errata and Contingencies
Operating System
Failing Test
Expiry
Date
ID
Number
Type
Error Description
Windows 7
Windows 7 64-bit
PCI Hardware
Compliance
Test For
Systems
12/1/2010
2051
Erratum
PCIHCT - Bit range 11:10 (ASPM Support)in the Link Capabilities
register (offset Ch) in the PCI Express Capability table is 0h. It
cannot be in the set of values {0x0, 0x2}. (Assertion 5CAF4993-
B8D1-4E4E-99EC-CC5895364E32)
Windows 7
Windows 7 64-bit
UAA Test -
Vista or
Server08
(System)
6/1/2015
513
Erratum
UAA Test requires the Traffic Priority bit to be read/write - however
there are two specs that apply, and they conflict. One says the bit
must be read/write, the other says it must be read-only. Contact has
been made with the author of both specs (Intel) but until this point
is clarified we cannot fail submissions containing this test failure.
Windows 7
Windows 7 64-bit
Class Drive
AC3 Test -
Win7
(System)
6/30/2025
1256
Erratum
Run AC3 test on a system with the Microsoft HD Audio class driver
installed. Expected results: All AC3 kernel streaming data ranges
should advertise MinimumBitsPerSample = 16 and
MaximumBitsPerSample = 16. Actual results: HD Audio class driver
sometimes advertises MaximumBitsPerSample = 24.
Windows 7
Windows 7 64-bit
Graphis HDMI
System Test
(Manual)
6/1/2011
1945
Erratum
Failure is due to the ELDv2 PortId not matching the graphics adapter
LUID. This cannot be enforced currently. In the future, video drivers
will be required to program the ELDv2 PortId with either, The
AdapterLUID for the corresponding display adapter -OR- 0
Windows 7
Windows 7 64-bit
PCI Hardware
Compliance
Test For
Systems
6/1/2011
1241
Erratum
This happens because the PCI Compliance test assumes that if the
Data Link Layer Link Active Reporting Capable bit in the Link
Capabilities register for a given PCIe port is set then that indicates
that the Data Link Layer Link Active bit will also be set. This is an
incorrect assumption because the Data Link Link Layer Link Active
bit can be reset when there is no device below the port. This
assertion needs to be removed from the PCIHCT. The current
architecture of the PCIHCT prevents it from knowing whether
devices exist below a bridge/port.
Windows 7
Windows 7 64-bit
PCI Hardware
Compliance
Test For
Systems
12/31/2010
753
Erratum
PCI Compliance: Bit range 23:0 (Organizationally Unique Identifier)in
the Serial Number 1st DW register (offset 4h) in the Device Serial
Number Capability table cannot have a value of 0h as it must
contain a value assigned by IEEE.