PLMP Report

Test Notes
Windows 7
Windows 7 64-bit
PCI Hardware
Compliance
Test For
Systems
12/01/2012
1241
Erratum
This happens because the PCI Compliance test assumes that if
the Data Link Layer Link Active Reporting Capable bit in the Link
Capabilities register for a given PCIe port is set then that
indicates that the Data Link Layer Link Active bit will also be set.
This is an incorrect assumption because the Data Link Link
Layer Link Active bit can be reset when there is no device
below the port. This assertion needs to be removed from the
PCIHCT. The current architecture of the PCIHCT prevents it from
knowing whether devices exist below a bridge/port.
Windows 7
Windows 7 64-bit
UAA Test -
Win7 (System)
6/1/2015
513
Erratum
UAA Test requires the Traffic Priority bit to be read/write -
however there are two specs that apply, and they conflict. One
says the bit must be read/write, the other says it must be read-
only. Contact has been made with the author of both specs
(Intel) but until this point is clarified we cannot fail submissions
containing this test failure.
Windows 7
Windows 7 64-bit
UAA Test -
Win7 (System)
6/1/2015
1300
Erratum
HD Audio pin configuration document calls out setting Port
Connectivity to No Connection as the way to turn a pin off in a
particular system. UAA Test incorrectly tests such pins.
Windows 7
Windows 7 64-bit
UAA Test -
Win7 (System)
6/1/2013
Filter
Number:32
76
Row:182
Erratum
Filter Number:3276 Row:182 ] - HDMI audio devices are backed
by video pipes; if a graphics subsystem exposes three output
ports, but only has two video pipes, it is not possible to get all
three HDMI audio endpoints "active" simultaneously.
Operating System
Test
Description
Windows 7
BIOS
download
Internal: http://bios.intel.com/downloads/
External: http://www.intel.com/ click on Support and Download
Windows 7
BIOS setup
Please make sure the BIOS setting are as below, otherwise use default
settings.
System Date and Time: Current date and time
Peripheral Configuration: Enable all onboard component
Drive Configuration: Set to AHCI
Chipset Configuration: Enable HPET
ACPI Suspend State: Set to <S3 State>
Boot Device Priority: set <Hard Disk Driver> to first
Windows 7 filter
update
WLK WHQL
test
http://winqual.microsoft.com/member/SubmissionWizard/LegalExemptions/filte
rupdates.cab
Special H/W that
use to PASS the
test
None
None