MLP Report

Errata and Contingencies
Operating
System
Failing Test
Expiry Date
ID Number
Type
Error Description
Windows
Vista
PCI Hardware
Compliance Test
For Systems
12/31/2011
2051
Erratum
Issue Description:
Windows
Vista-64bit
PCIHCT - Bit range 11:10 (ASPM Support)in the Link Capabilities
register (offset Ch) in the PCI Express Capability table is 0h. It
cannot be in the set of values {0x0, 0x2}. (Assertion
5CAF4993-B8D1-4E4E-99EC-CC5895364E32)
Windows 7
Windows 7
64-bit
Windows
Vista
PCI Hardware
Compliance Test
For Systems
6/1/2011
923
Erratum
Issue Description:
Windows
Vista-64bit
Assertion FAE18121-9177-4FB2-A081-0D04C285EFF2 Bit
range 15:0 (Extended Capability ID)in the Enhanced Capability
Header register (offset 0h) in the Unrecognized Enhanced
Capability ID 13 table is Dh. It must be in the range [0x0 - 0xB]
as all other Capability IDs are reserved.
Windows 7
Windows 7
64-bit
Windows
Vista
PCI Hardware
Compliance Test
For Systems
12/1/2012
1241
Erratum
Issue Description:
Windows
Vista-64bit
This happens because the PCI Compliance test assumes that if
the Data Link Layer Link Active Reporting Capable bit in the Link
Capabilities register for a given PCIe port is set then that
indicates that the Data Link Layer Link Active bit will also be
set. This is an incorrect assumption because the Data Link Link
Layer Link Active bit can be reset when there is no device
below the port. This assertion needs to be removed from the
PCIHCT. The current architecture of the PCIHCT prevents it
from knowing whether devices exist below a bridge/port.
Windows 7
Windows 7
64-bit
Windows
Vista
PCI Hardware
Compliance Test
6/1/2011
401
Erratum
Issue Description: