PLMP Report

Errata and Contingencies
Operating System
Failing Test
Expiry
Date
ID
Number
Type
Error Description
Windows 7
Windows 7 64-bit
PCI Hardware
Compliance
Test For
Systems
12/31/2010
753
Erratum
Errata 753 Assertion 3EF27DC9-463F-4712-857B-
0321832E7383 Bit range 23:0 (Organizationally Unique
Identifier)in the Serial Number 1st DW register (offset 4h) in the
Device Serial Number Capability table cannot have a value of 0h
as it must contain a value assigned by IEEE.
Windows 7
Windows 7 64-bit
PCI Hardware
Compliance
Test For
Systems
12/1/2010
1241
Erratum
This happens because the PCI Compliance test assumes that if
the Data Link Layer Link Active Reporting Capable bit in the Link
Capabilities register for a given PCIe port is set then that
indicates that the Data Link Layer Link Active bit will also be set.
This is an incorrect assumption because the Data Link Link
Layer Link Active bit can be reset when there is no device
below the port. This assertion needs to be removed from the
PCIHCT. The current architecture of the PCIHCT prevents it from
knowing whether devices exist below a bridge/port.
Windows 7
Windows 7 64-bit
PCI Hardware
Compliance
Test For
Systems
12/1/2010
423
Erratum
Assertion 5CAF4993-B8D1-4E4E-99EC-CC5895364E32 Bit
range 11:10 (ASPM Support)in the Link Capabilities register
(offset Ch) in the PCI Express Capability table is 0h. It cannot be
in the set of values {0x0, 0x2}. .
Windows 7
Windows 7 64-bit
1)Class Driver
AC3 Test -
Win7 (System)
6/30/2025
1256
Erratum
Run AC3 test on a system with the Microsoft HD Audio class
driver installed. Expected results: All AC3 kernel streaming data
ranges should advertise MinimumBitsPerSample = 16 and
MaximumBitsPerSample = 16. Actual results: HD Audio class
driver sometimes advertises MaximumBitsPerSample = 24.
Windows 7
Windows 7 64-bit
1)UAA Test -
Win7 (System)
6/1/2015
513
Erratum
UAA Test requires the Traffic Priority bit to be read/write -
however there are two specs that apply, and they conflict. One
says the bit must be read/write, the other says it must be read-
only. Contact has been made with the author of both specs
(Intel) but until this point is clarified we cannot fail submissions
containing this test failure.