PLMP Report

Errata and Contingencies
Operating
System
Failing Test
Expiry Date
ID
Number
Type
Error Description
Windows 7
Class Driver AC3
Test - Win7
(System)
06/30/2025
1256
Erratum
Issue Description:
Windows 7 64-
bit
Run AC3 test on a system with the Microsoft
HD Audio class driver installed. Expected
results: All AC3 kernel streaming data ranges
should advertise MinimumBitsPerSample = 16
and MaximumBitsPerSample = 16. Actual
results: HD Audio class driver sometimes
advertises MaximumBitsPerSample = 24.
Windows 7
Graphics HDMI
System Test
(Manual)
06/01/2011
1717
Erratum
Issue Description:
Windows 7 64-
bit
GraphicsHDMITest: should ignore pin widgets
that have "Port Connectivity" set to "No
Physical Connection"
Windows 7
PCI Hardware
Compliance Test For
Systems)
06/01/2011
923
Erratum
Issue Description:
Windows 7 64-
bit
Assertion FAE18121-9177-4FB2-A081-
0D04C285EFF2 Bit range 15:0 (Extended
Capability ID)in the Enhanced Capability Header
register (offset 0h) in the Unrecognized
Enhanced Capability ID 13 table is Dh. It must
be in the range [0x0 - 0xB] as all other
Capability IDs are reserved.
Windows 7
PCI Hardware
Compliance Test For
Systems)
12/01/2012
1241
Erratum
Issue Description:
Windows 7 64-
bit
This happens because the PCI Compliance test
assumes that if the Data Link Layer Link Active
Reporting Capable bit in the Link Capabilities
register for a given PCIe port is set then that
indicates that the Data Link Layer Link Active
bit will also be set. This is an incorrect
assumption because the Data Link Link Layer
Link Active bit can be reset when there is no
device below the port. This assertion needs to
be removed from the PCIHCT. The current
architecture of the PCIHCT prevents it from
knowing whether devices exist below a
bridge/port.
Windows 7
PCI Hardware
Compliance Test For
Systems)
06/01/2011
401
Erratum
Issue Description:
Windows 7 64-
bit
The following PCI Compliance test failure is
acceptable: Bit 15 (Bridge Configuration Retry
Enable) in the Device Control register (offset
8h) in the PCI Express Capability table must be
read-only and always return 0 as it is reserved
for devices other than PCI Express to PCI/PCI-X
Bridges. Assertion 13A41D3E-2576-41DC-
A67C-525DA3637CEA This failure is
acceptable because this is a PCIe 1.1 feature
and the WLP requires compliance with only
PCIe 1.0a.
Windows 7
PCI Hardware
12/31/2011
2051
Erratum
Issue Description: