PLMP Report

Test Notes
Windows 7
Windows 7 64-bit
UAA Test -
Vista or
Server08
(System)
6/1/2015
513
Erratum
UAA Test requires the Traffic Priority bit to be read/write - however
there are two specs that apply, and they conflict. One says the bit
must be read/write, the other says it must be read-only. Contact has
been made with the author of both specs (Intel) but until this point is
clarified we cannot fail submissions containing this test failure.
Windows 7
Windows 7 64-bit
Class Drive AC3
Test - Win7
(System)
6/30/2025
1256
Erratum
Run AC3 test on a system with the Microsoft HD Audio class driver
installed. Expected results: All AC3 kernel streaming data ranges
should advertise MinimumBitsPerSample = 16 and
MaximumBitsPerSample = 16. Actual results: HD Audio class driver
sometimes advertises MaximumBitsPerSample = 24.
Windows 7
Windows 7 64-bit
Graphis HDMI
System Test
(Manual)
6/1/2011
1945
Erratum
Failure is due to the ELDv2 PortId not matching the graphics adapter
LUID. This cannot be enforced currently. In the future, video drivers
will be required to program the ELDv2 PortId with either, The
AdapterLUID for the corresponding display adapter -OR- 0
Windows 7
Windows 7 64-bit
PCI Hardware
Compliance
Test For
Systems
6/1/2011
1241
Erratum
This happens because the PCI Compliance test assumes that if the
Data Link Layer Link Active Reporting Capable bit in the Link
Capabilities register for a given PCIe port is set then that indicates
that the Data Link Layer Link Active bit will also be set. This is an
incorrect assumption because the Data Link Link Layer Link Active bit
can be reset when there is no device below the port. This assertion
needs to be removed from the PCIHCT. The current architecture of
the PCIHCT prevents it from knowing whether devices exist below a
bridge/port.
Operating System
Test
Description
Windows 7 and
Vista
BIOS
download
Internal: http://bios.intel.com/downloads/
External: http://www.intel.com/ click on Support and Download
Windows 7 and
Vista
BIOS setup
Please make sure the BIOS setting are as below, otherwise use default
settings.
System Date and Time: Current date and time
Peripheral Configuration: Enable all onboard component
Drive Configuration: Set to IDE
Chipset Configuration: Enable HPET
ACPI Suspend State: Set to <S3 State>
Boot Device Priority: set <Hard Disk Driver> to first
Windows 7 and
Vista filter update
WLK WHQL
test
http://winqual.microsoft.com/member/SubmissionWizard/LegalExemptions/filte
rupdates.cab
Special H/W that
use to PASS the
test
None
None