MLP Report

Windows
7 64-bit
Windows
7
Graphics HDMI System
Test (Manual)
06/01/2011
1717
Erratum
Issue Description:
Windows
7 64-bit
GraphicsHDMITest: should ignore pin widgets that have
"Port Connectivity" set to "No Physical Connection"
Windows
7
UAA Test - Win7
(System)
12/31/2011
1670
Erratum
Issue Description:
Windows
7 64-bit
HDMI audio devices are backed by video pipes; if a
graphics subsystem exposes three output ports, but
only has two video pipes, it is not possible to get all
three HDMI audio endpoints "active" simultaneously.
Windows
Vista
WIN7:UAA Test - Win7
(System)
06/01/2011
1300
Erratum
Issue Description:
Windows
Vista-
64bit
Vista:UAA Test-Vista or
Server08
HD Audio pin configuration document calls out setting
Port Connectivity to No Connection as the way to turn
a pin off in a particular system. UAA Test incorrectly
tests such pins
Windows
7
Windows
7 64-bit
Windows
Vista
WIN7:UAA Test - Win7
(System)
07/01/2011
1466
Erratum
Issue Description:
Windows
Vista-
64bit
Vista:UAA Test-Vista or
Server08
Preview Filter: UAA Test - Intel Low Power DCN says
"EPSS implies KeepAlive, but only after July 1st 2011"
Windows
7
Windows
7 64-bit
Windows
Vista
WIN7:UAA Test - Win7
(System)
02/28/2011
1299
Erratum
Issue Description:
Windows
Vista-
64bit
Vista:UAA Test-Vista or
Server08
Preview filter - Jack Detect Override on digital pin
widgets Errata 1299 The HD Audio configuration
default register (7.3.3.31 in the HD Audio specification)
includes a "Jack Detect Override" flag that can be used
to indicate that although a pin widget would normally
be capable of jack detection, there is something about
this particular system that causes this to be impossible.
This was intended to be used, for example, for analog
pin widgets that are connected to RCA jacks, which do
not allow for impedance detection. Some digital pin
widgets are using the Presence Detect pin sense
response to indicate that a digital handshake has
occured - indeed, HDMI pins have entire DCNs built
around this concept, and it applies equally well to
S/PDIF pins. A digital converter that supports presence
detection should be able to do so in any system, so the
"Jack Detect Override" concept should not apply to
digital pins.
Windows
7
Windows
7 64-bit
Windows
Vista
WIN7:UAA Test - Win7
(System)
06/01/2015
513
Erratum
Issue Description: