Document

3. Copy IFLASH2.EXE and the .BIO file to the bootable USB device.
4. Configure the BIOS of the target computer to boot to the USB device:
a. Press F2 during boot to enter BIOS Setup.
b. Go to the Boot menu.
c. Enable USB Boot.
d. Press F10 to save and exit the BIOS Setup.
5. Boot the target computer with the USB device connected.
6. At the prompt, type IFLASH2 /PF XXX.BIO, where XXX.BIO is the filename of the .BIO file and press
Enter.
7. Follow all prompts.
Creating a Bootable USB Device
Refer to any of the following websites for tips on creating bootable USB devices. Intel is unable to assist
with the creation of bootable devices.
• Make your Thumb Drive Bootable at
http://www.computermag.com/article2/0,1895,1846793,00.asp
• Boot from USB Flash Drive at http://www.weethet.nl/english/hardware_bootfromusbstick.php
You can also search for additional resources on the web for creating bootable USB devices. Search on
“How to create bootable USB drives”.