PLMP Report

Errata and Contingencies
Operating System
Failing Test
Expiry
Date
ID
Number
Type
Error Description
Windows7
Windows7 64bit
Class Driver AC3
Test - Win7
(System)
6/30/2025
1256
Erratum
Run AC3 test on a system with the Microsoft HD Audio class
driver installed. Expected results: All AC3 kernel streaming data
ranges should advertise MinimumBitsPerSample = 16 and
MaximumBitsPerSample = 16. Actual results: HD Audio class
driver sometimes advertises MaximumBitsPerSample = 24.
Windows7
Windows7 64bit
PCI Hardware
Compliance Test
For Systems
12/1/2012
401
Erratum
The following PCI Compliance test failure is acceptable: Bit 15
(Bridge Configuration Retry Enable) in the Device Control
register (offset 8h) in the PCI Express Capability table must be
read-only and always return 0 as it is reserved for devices other
than PCI Express to PCI/PCI-X Bridges. Assertion 13A41D3E-
2576-41DC-A67C-525DA3637CEA This failure is acceptable
because this is a PCIe 1.1 feature and the WLP requires
compliance with only PCIe 1.0a.
6/1/2011
423
Erratum
Assertion 5CAF4993-B8D1-4E4E-99EC-CC5895364E32 Bit
range 11:10 (ASPM Support)in the Link Capabilities register
(offset Ch) in the PCI Express Capability table is 0h. It cannot be
in the set of values {0x0, 0x2}.
12/31/2011
2051
Erratum
PCIHCT - Bit range 11:10 (ASPM Support)in the Link Capabilities
register (offset Ch) in the PCI Express Capability table is 0h. It
cannot be in the set of values {0x0, 0x2}. (Assertion 5CAF4993-
B8D1-4E4E-99EC-CC5895364E32)
12/1/2012
923
Erratum
Assertion FAE18121-9177-4FB2-A081-0D04C285EFF2 Bit
range 15:0 (Extended Capability ID)in the Enhanced Capability
Header register (offset 0h) in the Unrecognized Enhanced
Capability ID 13 table is Dh. It must be in the range [0x0 - 0xB]
as all other Capability IDs are reserved.
Windows7
Windows7 64bit
UAA Test - Win7
(System)
6/1/2015
513
Erratum
UAA Test requires the Traffic Priority bit to be read/write -
however there are two specs that apply, and they conflict. One
says the bit must be read/write, the other says it must be read-
only. Contact has been made with the author of both specs
(Intel) but until this point is clarified we cannot fail submissions
containing this test failure.