MLP Report

Windows 7
Windows 7 64-bit
UAA Test -
Win7 (System)
12/01/2009 1394
Erratum
UAA Test requires the Traffic Priority bit to be read/write -
however there are two specs that apply, and they conflict. One
says the bit must be read/write, the other says it must be read-
only. Contact has been made with the author of both specs
(Intel) but until this point is clarified we cannot fail submissions
containing this test failure.
Windows 7
Windows 7 64-bit
UAA Test -
Win7 (System)
06/01/2010 1587
Erratum
The Intel HD Audio DCN 35-A, HDMI/High Bit Rate, repurposes
bits 0 and 1 of the Pin Widget Control verb to be the Encoded
Packet Type (for example, "native" or "high bit rate.) See section
7.3.3.13 of the DCN for further information:
http://www.intel.com/standards/hdaudio/
The codec is expected to perform validation on EPT values set
in this fashion. From the DCN:
If the value written to this control does not correspond to a
supported value as defined in the Pin Capabilities parameter,
the control must either retain the previous value or take the
value of 00, which will select the default native audio packet
type.
Windows 7
Windows 7 64-bit
UAA Test -
Win7 (System)
06/01/2010 1665
Erratum
The Intel HD Audio DCN 34-A2, HDMI/Multichannel, defines a
mapping between digital converter channels and HDMI slots; see
section 7.3.3.41 of the DCN. Much of the verbiage is generalized
in DCN 36-A to apply equally to DisplayPort slots. The latest
versions of all DCNs are posted on Intel's HD Audio standards
page: http://www.intel.com/standards/hdaudio/
The default mapping from digital converter channels to slots is
expected to be 0 --> 0, 1 --> 1, 2 --> ***3***, 3 --> ***2***, 4 -->
4, 5 --> 5, 6 --> 6, and 7 --> 7.