MLP Report

Windows Vista-
64bit
For Systems
The following PCI Compliance test failure is
acceptable: Bit 15 (Bridge Configuration Retry
Enable) in the Device Control register (offset
8h) in the PCI Express Capability table must be
read-only and always return 0 as it is reserved
for devices other than PCI Express to PCI/PCI-X
Bridges. Assertion 13A41D3E-2576-41DC-
A67C-525DA3637CEA This failure is
acceptable because this is a PCIe 1.1 feature
and the WLP requires compliance with only
PCIe 1.0a.
windows 7
windows 7 -64bit
Windows Vista
Vista:UAA Test - Vista or
Server08 (System)
Win7:UAA Test - Win7 (System)
06/01/2011
1300
Erratum
Issue Description:
Windows Vista-
64bit
HD Audio pin configuration document calls out
setting Port Connectivity to No Connection as
the way to turn a pin off in a particular system.
UAA Test incorrectly tests such pins.
windows 7
windows 7 -64bit
Windows Vista
Vista:UAA Test - Vista or
Server08 (System)
Win7:UAA Test - Win7 (System)
07/01/2011
1466
Erratum
Issue Description:
Windows Vista-
64bit
Preview Filter: UAA Test - Intel Low Power DCN
says "EPSS implies KeepAlive, but only after
July 1st 2011"
windows 7
windows 7 -64bit
Windows Vista
Vista:UAA Test - Vista or
Server08 (System)
Win7:UAA Test - Win7 (System)
02/28/2011
1299
Erratum
Issue Description:
Windows Vista-
64bit
Preview filter - Jack Detect Override on digital
pin widgets Errata 1299 The HD Audio
configuration default register (7.3.3.31 in the
HD Audio specification) includes a "Jack Detect
Override" flag that can be used to indicate that
although a pin widget would normally be
capable of jack detection, there is something
about this particular system that causes this to
be impossible. This was intended to be used, for
example, for analog pin widgets that are
connected to RCA jacks, which do not allow for
impedance detection. Some digital pin widgets
are using the Presence Detect pin sense
response to indicate that a digital handshake
has occured - indeed, HDMI pins have entire
DCNs built around this concept, and it applies
equally well to S/PDIF pins. A digital converter
that supports presence detection should be
able to do so in any system, so the "Jack Detect
Override" concept should not apply to digital
pins.
windows 7
windows 7 -64bit
Windows Vista
Vista:UAA Test - Vista or
06/01/2015
513
Erratum
Issue Description: