PLMP Report

Errata and Contingencies
Operating
System
Failing Test
Expiry Date
ID
Numbe
r
Type
Error Description
windows 7
windows 7 -
64bit
PCI Hardware
Compliance Test
For
Systems
12/01/2012 401 Erratum
Issue Description:
The following PCI Compliance test failure is acceptable: Bit 15
(Bridge Con
figuration Retry Enable) in the Device Control register
(offset 8h) in the PCI Express Capability table must be read-only
and always return 0 as it is reserved for devices other than PCI
Express to PCI/PCI-X Bridges. Assertion 13A41D3E-2576-41DC-
A67C-525DA3637CEA This failure is acceptable because this is a
PCIe 1.1 feature and the WLP requires compliance with only PCIe
1.0a.
windows 7
windows 7 -
64bit
PCI Hardware
Compliance Test
For
Systems
12/01/2012
1241
Erratum
Issue Description:
Data Link Layer Link Active Reporting Capable bit is set but Data
Link Layer Link Active is not.
windows 7
windows 7 -
64bit
UAA Test - Win7
(System)
06/01/2015 513 Erratum
Issue Description:
UAA Test requires the Traffic Priority bit to be
read/write - however there are two specs that apply, and they
conflict. One says the bit must be read/write, the other says it
must be read-
only. Contact has been made with the author of
both specs (Intel) but until this point is clarified we cannot fail
submissions containing this test failure.
windows 7
windows 7 -
64bit
UAA Test - Win7
(System)
06/01/2015 1300 Erratum
Issue Description:
HD Audio pin configuration
document calls out setting Port Connectivity to No Connection as
the way to turn a pin off in a
particular system. UAA Test incorrectly tests such pins.
windows 7
windows 7 -
64bit
UAA Test - Win7
(System)
06/01/2013 Filter
3276
Erratum
Issue Description:
HDMI audio devices are backed by video pipes; if a graphics
subsystem exposes three output ports, but only has two video
pipes, it is not possible to get all three HDMI audio endpoints
"active"
simultaneously.
windows 7
windows 7 -
64bit
UAA Test - Win7
(System)
03/31/2012 Filter
4119
Contingenc
ies
Issue Description:
Specific codecs do not correctly support Input Enable and Output
Enable pin widget
controls. This results in an attempt to shut off the pin, and it
doesn't shut off. The Microsoft audio class driver has other ways
of making
sure the pins don't make sound, which
happen to work for these specific codecs.