BIOS Settings Glossary version 13 - By Menu

BIOS Settings Dictionary – By Menu
V13 – November 2009
Advanced > Management Configuration Menu
BIOS Setting Options Description / Purpose
ASF Support • Enabled
• Disabled
or
• Automatic
• Manual - User
Defined
• Disabled
Disables or enables Alert Standard Format (ASF).
For information on ASF, refer to
http://www.intel.com/design/network/papers/ASF_whitepaper.htm
Enter AMT BX Setup • Enabled
• Disabled
Allows AMT BIOS Extensions Setup to be entered on next
boot up
Intel® AMT IDER Operation
This BIOS setting is present
only on D945G boards
supporting Intel® Active
Management Technology.
• Enabled
• Disabled
Enables or disables IDE Redirect (IDER).
Intel® AMT SOL Operation
This BIOS setting is present
only on D945G boards
supporting Intel® Active
Management Technology.
• Automatic
• Enabled
• Disabled
Allows Serial Over LAN (SOL) to be forced enabled or disabled.
Rate is set to115200 baud.
Advanced > Memory Configuration Menu
BIOS Setting Options Description / Purpose
CPC Override • Auto
• Enabled
• Disabled
Controls Command Per Clock/1n rule mode. When
enabled, allows DRAM controller to attempt Chip Select
assertions in two consecutive common clocks.
Memory Frequency Options depend on
board model (can
be from 333MHz to
800MHz)
Allows you to manually set the speed of your memory
Memory Correction
This BIOS setting is present
only on Desktop Boards that
support ECC memory when
ECC DIMMs are installed.
• Non-ECC
• ECC
Allows you to turn error reporting on or off if the system and
all the memory installed supports ECC (Error Correction
Code).
Memory Mode No changeable
options
Displays single or dual channel operation.