BIOS Settings Glossary version 19

BIOS Settings Glossary BACK
V19 – November 2012 BACK
R
BIOS Setting
Appears on BIOS Screen…
Options
Description / Purpose
Redirection Mode
Intel® ME > Intel® Active (or
Standard) Management
Technology Configuration >
SOL/IDER Configuration
• Enable
• Disable
Enable or disable redirection mode.
Redirection mode must be enabled when using a legacy
SMB Redirection Console which was intended for AMT
5.0 or earlier.
Remote Control of
Opt-in Policy
Intel® ME > Intel® Active (or
Standard) Management
Technology Configuration >
KVM Configuration
• Enable
• Disable
Enable: allows a remote user to set the User Opt-in
policy.
Disable: prevents a remote user from setting the User
Opt-in policy.
Removable Drive
Order
Boot
Lists all
installed
removable
devices
Allows you to set the boot order of removable devices
(floppy drives, USB thumb drives, etc.) - used when Boot
Menu type is set to normal.
All detected removable devices will be included in the list.
The user can change the order of devices. When
attempting to boot to removable drives, the BIOS will
attempt to boot to each device in the order of this list.
Reset Intel® AMT
to default factory
settings
Maintenance
or
Intel® ME > Intel® Active
Management Technology
Configuration
Continue?
(Y/N)
Resets all Intel
®
AMT configuration settings to their
factory defaults. When selected, the BIOS will
unprovision AMT and load default Intel® ME settings.
Reset Intel®
Standard
Manageability to
default factory
settings
Maintenance
or
Intel® ME > Intel® Standard
Management Technology
Configuration
Continue?
(Y/N)
Resets all Intel® Standard Manageability configuration
settings to their factory defaults. When selected, the
BIOS will unprovision Standard Manageability and load
default Intel® ME settings.
Responsiveness
Configuration > Fan Control &
Real-Time Monitoring
• Slow
• Normal
• Aggressive
Defines how quickly fan speed changes based upon
changes in temperature.
Restore Default
Configuration
Configuration > Fan Control &
Real-Time Monitoring
Continue?
(Y/N)
When this question is selected, the BIOS Fan Control
configuration is erased and defaults are loaded. This
does not affect any other BIOS Setup questions.
S
BIOS Setting
Appears on BIOS Screen…
Options
Description / Purpose
S1 State Indicator
Power
• Off
• Blink
• On
• Alternate
Color
Determines front panel LED behavior during S1 system
power state.
S3 State Indicator
Power
• Off
• Blink
• On
• Alternate
Color
Determines front panel power LED behavior during S3
system power state.