DZ68BC

Material Declaration Datasheet
Restriction on Hazardous Substances (RoHS) Compliance
Manufacturer: Intel Corporation Date: September 01, 2011
Equipment type: CPU Board Product: Lead-free Second Level Interconnect (SLI)
Product Family Code: DZ68BC
RoHS Definitions:
Quantity limit of 0.1% by mass (1,000 ppm) for: Lead (Pb); Mercury; Hexavalent Chromium; Polybrominated
Biphenyls (PBB); Polybrominated Diphenyl Ethers (PBDE). Quantity limit of 0.010% by mass (100 ppm) for
Cadmium.
Intel understands RoHS compliance requires Lead and other materials banned in RoHS Directive are either (1)
below all applicable substance thresholds as proposed by the EU, or (2) an approved or pending exemption
applies. Note - RoHS implementation details are subject to change.
RoHS Declaration:
This product is RoHS directive compliant but does contain Lead, a RoHS restricted substance per the definitions
above. This product uses the following applicable RoHS technology exemptions: 5, 7a, 7c
This product has been verified to be in conformance with EU directive 2002/95/EC as currently understood. To
the best of our knowledge the information contained in this declaration is true and correct.
Level A Materials and Substances:
This product does contain materials listed in Annex A of the EIA/EICTA/JGPSSI Material Composition
Declaration Guide above the threshold level of 1,000 ppm as listed below:
- Lead/Lead Compounds
Level B Materials and Substances:
This product does contain materials listed in Annex B of the EIA/EICTA/JGPSSI Material Composition
Declaration Guide above the threshold level of 1,000 ppm as listed below:
Antimony/Antimony Compounds, Arsenic/Arsenic Compounds, Bismuth/Bismuth Compounds, Brominated
Flame Retardants (other than PBBs or PBDEs), Nickel (external applications only), Polyvinyl Chloride (PVC).
COMMENTS
1. The data reported for Level A and B materials and substances are based on analytical testing of a
representative sample product. Individual test results may vary due to differences in production and/or
sensitivities of analytical testing methods. Data shown reflect analytical testing intended to validate Intel's
RoHS compliance systems. Intel’s certification of RoHS compliance at the homogenous material level is
based on Supplier Declarations of Conformance.
2. This declaration is based on the product specified, with all product skus of this product eligible to be covered
by this declaration.
3. Material concentration data in parts per million (ppm) is representative of all product skus within the product
family.
4. Material mass can be estimated by multiplying concentration (in ppm) by product weight.
5. The remainder of this product consists of non-reportable metals (i.e., copper, iron, tin), epoxy resin and other
non-metal materials.
INTEL ACCEPTS NO DUTY TO UPDATE THIS MDDS OR TO NOTIFY USERS OF THIS MDDS OF
UPDATES OR CHANGES TO THIS MDDS. INTEL SHALL NOT BE LIABLE FOR ANY DAMAGES,
DIRECT OR INDIRECT, CONSEQUENTIAL OR OTHERWISE, SUFFERED BY USERS OR THIRD
PARTIES AS A RESULT OF THE USERS RELIANCE ON INFORMATION IN THIS MDDS THAT HAS
BEEN UPDATED OR CHANGED.