Front Panel I/O Connectivity Design Guide

Table 14. Audio Cable Construction Recommendations

Part Qty

Manufacturer/Part Number

Note

Material Description

Note

2X5 Header 2 FCI*/ 65043-032 Header

Key 2 N/A Key

Heat-Shrink Tubing As req. N/A UL Heat-shrink Tube

26 AWG

(4 twisted pair

shielded wire)

As req. N/A UL Certified Conductor Wire

Part Label 1 N/A Manufacturer’s name and P/N

Note: Or equivalent.

Table 15. Additional Audio Cable Recommendations

Characteristic Specification

Flammability Rating UL*-94 VW-1

Insulation Resistance 5000 @ 300 VDC

Temperature Range - 55 °C to + 80 °C

Withstand Voltage 1000 VDC @ 60 Hz

Plating Per materials list.

Wire Per materials list.

Workmanship Parts shall be uniform in workmanship and appearance. There shall be

no excessive nicks, deep scratches, excessive burrs, or defects in

materials that may affect the function, serviceability, or appearance of this

part.

Contact retention equal to or greater than 2.0 oz. per contact, when

unmated force: from the proper connector.

Maximum Insertion Force: 10 pounds per connector.

Dimensioning and Tolerances Per ANSI Y14.5M unless otherwise noted on drawing.

UL Marking The cable manufacturer should supply UL recognized cables that are

certified under the UL wiring harness program (ZPFW2). The UL

recognition mark should be supplied with the smallest container or bundle

of cables with each shipment.

Recognition Mark The UL recognized wire’s insulation will have surface printing identifying

the style, flammability rating, manufacturer’s name, voltage, and

temperature ratings, along with the UL mark.