Printable PDF version

Image 1: Jumper removed Image 2: Jumper in place
(BIOS Recovery Mode) (Normal Mode)
6. Power the computer on.
7. Wait 2-5 minutes for the update to complete.
8. The computer will either turn off when the recovery process is completed or it will prompt you to turn it
off.
9. Remove the USB device.
10. Replace the BIOS Configuration Jumper (image 2 above).
11. Close the chassis.
12. Restart the computer.
Recovery with Diskette
Use this method if the recovery file (*.BIO) is small enough to fit on a diskette (smaller than 1.44MB) and
the desktop board includes diskette drive support. The diskette does NOT need to be bootable; however,
it must be formatted.
1. Download and save the Recovery BIOS file to a temporary directory. Example: