WHC report

Window7 32-bit
Window 7 64-bit
Windows 8 64-bit
UAA Test
(System)
07/01/2014 354
Contingency
The FIFO size for Input and Output Stream Descriptors should
be read only.
Window7 32-bit
Window 7 64-bit
Windows 8 64-bit
UAA Test
(System)
03/31/2014 1039
Errata
The FIFO size for Input and Output Stream Descriptors should
be read only.
Window 8 64-bit
USB3
Termination
08/01/2013 720
Errata
USB3 Termination Test bug causes it to fail when a device is
embedded on xHCI. If Filter #720 allows the 'FindUsb3Device'
task to pass, then Errata ID 720 can be used to manually
overturn other failing tasks in the 'USB3 Termination' test,
such as 'Copy ETL log(s)', 'RebootIfTestApplies', 'RunParser',
'EnableBootEtw', and 'DisableBootEtw'.
Window 8 64-bit
USB Exposed
Port System
Test
09/30/2013 1435
Auto Triage
The USB Esposed Port Controller Test is known to fail
without logs in certain configurations using the xHCI
Controller on this system. Please right-click the failed task to
review the Error information. If the task failed with ExitCode
c0000374, a manual erratum might apply. Before using the
manual erratum, it is necessary to review the
PortMappingFinder.wtl log for the Port Mapping Tool task. If
the log contains any 'No companion port for SuperSpeed port'
errors, please contact the xHCI Controller vendor for a
firmware update and do not attempt to use the manual
erratum. If there are no errors, but there is a 'Couldn't get
connector properties for hub' message, please use Manual
Errata 1435 in a Readme form. The erratum will only be
honored if this AutoTriage filter applies to the Run Test task.
Windows 8 64-bit
xHCI Debug
Capability
Compliance
(Logo)
07/31/2014 316
Contingency
The XHCI Debug Capability Compliance Test will fail XHCI
controllers that do not provide the debug capability registers.