Manualshelf

Front Panel I/O Connectivity Design Guide

ManualsBrandsIntel ManualsOtherIntel Desktop Board DP55SB
61626364656667686970
Front Panel I/O Connectivity Design Guide
70
Figure 38. LPC Debug Connector Dimensions
The LPC debug connector’s hole pattern is shown in Figure 39.
Figure 39. LPC Debug Connector Hole Layout
A physical keep-out around the LPC debug connector should be observed. The keep-out zone is
0.160 inches from the end of the connector hole pattern and 0.080 inches from the side of the
connector, measured from the center of any pin. The keep-out is used to allow the cable connector
to be attached without interference from adjacent components. The keep-out is shown in Figure 40.