DQ35MP Technical Product Specification
Table Of Contents
- Intel® Desktop Board DQ35MP Technical Product Specification
- Revision History / Disclaimer
- Preface
- Contents
- 1 Product Description
- 1.1 Overview
- 1.2 Legacy Considerations
- 1.3 Online Support
- 1.4 Processor
- 1.5 System Memory
- 1.6 Intel® Q35 Express Chipset
- 1.7 Parallel IDE Controller
- 1.8 Real-Time Clock Subsystem
- 1.9 Legacy I/O Controller
- 1.10 Audio Subsystem
- 1.11 LAN Subsystem
- 1.12 Intel® Active Management Technology(Intel® AMT)
- 1.13 Hardware Management Subsystem
- 1.14 Power Management
- 1.15 Trusted Platform Module (TPM)
- 2 Technical Reference
- 3 Overview of BIOS Features
- 4 Error Messages and Beep Codes
- 5 Regulatory Compliance and Battery Disposal Information
Product Description
15
1.2 Legacy Considerations
This board differs from other Intel
®
Desktop Board products, with specific changes
including (but not limited to) the following:
• No parallel port
• No floppy drive connector
• No PS/2 ports for mouse and keyboard
• No serial port on the back panel
• The serial port header is located near the memory sockets and may require a
specialized chassis or cabling solution to use
1.3 Online Support
To find information about… Visit this World Wide Web site:
Intel Desktop Board DQ35MP http://www.intel.com/products/motherboard/DQ35MP/index.htm
Desktop Board Support http://support.intel.com/support/motherboards/desktop
Available configurations for the
Desktop Board DQ35MP
http://www.intel.com/products/motherboard/DQ35MP/index.htm
Supported processors http://www.intel.com/go/findcpu
Chipset information http://www.intel.com/products/desktop/chipsets/index.htm
BIOS and driver updates http://downloadcenter.intel.com
Tested Memory http://support.intel.com/support/motherboards/desktop/sb/CS-
025414.htm
1.4 Processor
The board is designed to support the following processors:
• Intel Core 2 Quad processor in an LGA775 socket with a 1066 MHz system bus
• Intel Core 2 Duo processor in an LGA775 socket with a 1333 MHz, 1066 MHz, or
800 MHz system bus
• Intel Pentium Dual-Core processor in an LGA775 socket with an 800 MHz
system bus
• Intel Celeron processor 400 sequence in an LGA775 socket with an 800 MHz
system bus
Other processors may be supported in the future. This board is designed to support
processors with a maximum wattage of 105 W. The processors listed above are only
supported when falling within the wattage requirements of the DQ35MP board. See
the Intel web site listed below for the most up-to-date list of supported processors.
For information about… Refer to:
Supported processors http://www.intel.com/go/findcpu