DQ35MP Technical Product Specification
Table Of Contents
- Intel® Desktop Board DQ35MP Technical Product Specification
- Revision History / Disclaimer
- Preface
- Contents
- 1 Product Description
- 1.1 Overview
- 1.2 Legacy Considerations
- 1.3 Online Support
- 1.4 Processor
- 1.5 System Memory
- 1.6 Intel® Q35 Express Chipset
- 1.7 Parallel IDE Controller
- 1.8 Real-Time Clock Subsystem
- 1.9 Legacy I/O Controller
- 1.10 Audio Subsystem
- 1.11 LAN Subsystem
- 1.12 Intel® Active Management Technology(Intel® AMT)
- 1.13 Hardware Management Subsystem
- 1.14 Power Management
- 1.15 Trusted Platform Module (TPM)
- 2 Technical Reference
- 3 Overview of BIOS Features
- 4 Error Messages and Beep Codes
- 5 Regulatory Compliance and Battery Disposal Information
Product Description
25
1.10.1 Audio Subsystem Software
Audio software and drivers are available from Intel’s World Wide Web site.
For information about Refer to
Obtaining audio software and drivers Section 1.2, page 15
1.10.2 Audio Connectors and Headers
The board contains audio connectors on the back panel and audio headers on the
component side of the board. The front panel audio header provides mic in and line
out signals for the front panel. Microphone bias is supported for both the front and
back panel microphone connectors.
The front/back panel audio connectors are configurable through the audio device
drivers. The available configurable audio ports are shown in Figure 4.
Item Description
A Line in
B Line out
C Mic in
Figure 4. Back Panel Audio Connector Options
For information about Refer to
The location of the front panel audio header Figure 11, page 43
The signal names of the front panel audio header Table 13, page 45
The location of the HD Audio Link header Figure 11, page 43
The signal names of the HD Audio Link header Table 12, page 45
The back panel audio connectors Section 2.2.1, page 42