DQ35MP Technical Product Specification
Table Of Contents
- Intel® Desktop Board DQ35MP Technical Product Specification
- Revision History / Disclaimer
- Preface
- Contents
- 1 Product Description
- 1.1 Overview
- 1.2 Legacy Considerations
- 1.3 Online Support
- 1.4 Processor
- 1.5 System Memory
- 1.6 Intel® Q35 Express Chipset
- 1.7 Parallel IDE Controller
- 1.8 Real-Time Clock Subsystem
- 1.9 Legacy I/O Controller
- 1.10 Audio Subsystem
- 1.11 LAN Subsystem
- 1.12 Intel® Active Management Technology(Intel® AMT)
- 1.13 Hardware Management Subsystem
- 1.14 Power Management
- 1.15 Trusted Platform Module (TPM)
- 2 Technical Reference
- 3 Overview of BIOS Features
- 4 Error Messages and Beep Codes
- 5 Regulatory Compliance and Battery Disposal Information
Product Description
31
1.13.4 Thermal Monitoring
Figure 6 shows the locations of the thermal sensors and fan headers.
Item Description
A Rear chassis fan
B Thermal diode, located on the GMCH die
C Thermal diode, located on processor die
D Remote thermal sensor
E Processor fan
F Thermal diode, located on the ICH9DO die
G Front chassis fan
Figure 6. Thermal Sensors and Fan Headers
NOTE
The minimum thermal reporting threshold for the GMCH is 66 °C. The GMCH thermal
sensor will display 66 °C until the temperature rises above this point.