DQ35MP Technical Product Specification
Table Of Contents
- Intel® Desktop Board DQ35MP Technical Product Specification
- Revision History / Disclaimer
- Preface
- Contents
- 1 Product Description
- 1.1 Overview
- 1.2 Legacy Considerations
- 1.3 Online Support
- 1.4 Processor
- 1.5 System Memory
- 1.6 Intel® Q35 Express Chipset
- 1.7 Parallel IDE Controller
- 1.8 Real-Time Clock Subsystem
- 1.9 Legacy I/O Controller
- 1.10 Audio Subsystem
- 1.11 LAN Subsystem
- 1.12 Intel® Active Management Technology(Intel® AMT)
- 1.13 Hardware Management Subsystem
- 1.14 Power Management
- 1.15 Trusted Platform Module (TPM)
- 2 Technical Reference
- 3 Overview of BIOS Features
- 4 Error Messages and Beep Codes
- 5 Regulatory Compliance and Battery Disposal Information
Intel Desktop Board DQ35MP Technical Product Specification
56
2.7 Reliability
The Mean Time Between Failures (MTBF) prediction is calculated using component and
subassembly random failure rates. The calculation is based on the Bellcore Reliability
Prediction Procedure, TR-NWT-000332, Issue 4, September 1991. The MTBF
prediction is used to estimate repair rates and spare parts requirements.
The MTBF data is calculated from predicted data at 55 ºC. The Desktop Board
DQ35MP MTBF is 225,125 hours.
2.8 Environmental
Table 29 lists the environmental specifications for the board.
Table 29. Desktop Board DQ35MP Environmental Specifications
Parameter Specification
Temperature
Non-Operating
-40 °C to +70 °C
Operating
0 °C to +55 °C
Shock
Unpackaged 50 g trapezoidal waveform
Velocity change of 170 inches/second²
Packaged Half sine 2 millisecond
Product weight (pounds) Free fall (inches) Velocity change
(inches/sec²)
<20 36 167
21-40 30 152
41-80 24 136
81-100 18 118
Vibration
Unpackaged 5 Hz to 20 Hz: 0.01 g² Hz sloping up to 0.02 g² Hz
20 Hz to 500 Hz: 0.02 g² Hz (flat)
Packaged 10 Hz to 40 Hz: 0.015 g² Hz (flat)
40 Hz to 500 Hz: 0.015 g² Hz sloping down to 0.00015 g² Hz