Quick Start Guide

Intel Active Management with System Defense Feature
Quick Reference Guide 7
Intel
®
AMT Configuration and Provisioning
After completing configuration of the Intel Management Engine,
the Intel AMT settings can be set.
1. Power on the computer and enter the system BIOS by
pressing the F2 key.
2. Using the arrow keys, select the Intel Management Engine
item from the top menu bar and press the Enter key.
3. Type in the Intel Management Engine password. (Note:
This password is case sensitive.)
4. Select Intel Active Management Technology Configuration
and press the Enter key.
5. Change the Computer Name and press the Enter key.

NOTE
Computer name must be between 1 and 32 characters long,
may contain upper case characters, lower case characters
numbers, however spaces, dashes, and any other special
characters (for example: !, @, #, $, %, ^, &, *) are not
allowed.
6. Select TCP/IP Configuration and press the Enter key.
7. By default, DHCP is enabled. If DHCP is disabled, enter the
following TCP/IP settings for Intel AMT:
• Static TCP/IP address. Both the TCP/IP address and
Host Name must be different than those configured for
the operating system.
• Subnet mask.
• Default Gateway address (optional).
• Preferred Domain Naming Services (DNS) server
address (optional).
• Alternate DNS server address (optional).
• Domain name (optional).
8. When done, press the ESC key to exit to the Intel Active
Management Technology menu.
9. Select Provisioning Configuration.