EES-5718 Series Intel® Celeron® M Micro PC Quick Reference Guide 1st Ed – 16 September 2005 Part No.
EES-5718 Series FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
Quick Reference Guide Disclaimer Evalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance.
EES-5718 Series Technical Support We want you to get the maximum performance from your products. So if you run into technical difficulties, we are here to help. For the most frequently asked questions, you can easily find answers in your product documentation. These answers are normally a lot more detailed than the ones we can give over the phone. So please consult the user’s manual first. To receive the latest version of the user’s manual; please visit our Web site at: http://www.evalue-tech.
Quick Reference Guide Product Warranty Evalue warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Evalue, or which have been subject to misuse, abuse, accident or improper installation.
EES-5718 Series Contents 1. Getting started ............................................................................................................7 1.1 Safety Precautions ................................................................................................7 1.2 Packing List ...........................................................................................................7 1.3 System Overview.........................................................................................
Quick Reference Guide 1. Getting started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
EES-5718 Series 1.3 System Overview 1.3.1 Front View 1.3.
Quick Reference Guide 1.4 System Specifications System CPU Onboard Mobile Intel® µFC-BGA 479 Celeron 600 MHz with 0K L2 Cache Optional Celeron 600 MHz with 512K Cache or Celeron 1.0 GHz with 512K Cache BIOS Award 512 KB Flash BIOS System Chipset Intel® RG82852GM GMCH/FW2801DB ICH4 I/O Chipset Winbond W83627HF-AW System Memory One 184-pin DIMM socket supports up to 1 GB DDR 200/266 SDRAM SSD One CompactFlash Type I/II socket Watchdog Timer Reset: 1 sec.~255 min. and 1 sec. or 1 min.
EES-5718 Series Environment & Mechanical Operating Temperature 0 to 45°C (32~113°F) Storage Temperature -20 to +75°C (-4~167°F) Relative Humidity 5 to 90% @ 45°C (113°F), relative humidity, non-condensing Mounting Desktop Dimension (W x H x D) 9.37" x 6.3" x 2.36" (238 mm x 160 mm x 60mm) Weight 4.
Quick Reference Guide 1.
EES-5718 Series 2.
Quick Reference Guide 2.1 Jumper and Connector Setting, Driver and BIOS installing z Please refer to ECM-5716/5718 Quick Installation Guide or User’s Manual. Note: If you need more information, please visit our website: http://www.evalue-tech.com 2.2 Installing Hard Disk Step 1. Unscrew two screws as indicated and take off the chassis cover. Step 2. Place HDD in the tray and fasten four screws. Step 3. Put the cover back and fasten four screws to complete the installation.
EES-5718 Series 2.3 Installing System Memory Step 1. Unscrew five screws as indicated and take off the chassis cover. Step 2. Install the SDRAM.
Quick Reference Guide 2.4 Installing CompactFlash Step 1. Unscrew a screw and take off the chassis cover as indicated. Step 2. Install the CF card. Step 3. Put the cover back and fasten the screw to complete the installation.
EES-5718 Series 16 EES-5718 Series Quick Reference Guide
