EX-98211 Fanless Intel Celeron/Pentium M Box PC Quick Installation Guide Version 1.
Chapter1 1 General Information 1.1 Introduction The EX-98211 Box PC is targeted at many different application fields. By adopting it, you can pinpoint specific markets, such as Thin Client, KIOSK, information booth, GSM Server, environment-critical and space-critical applications. All-In-One Platform The CPU, DRAM and even software are integrated to provide a plugand- play machine. Compact-sized The kernel of EX-98211 is EX-90212, which is a non-standard form factor embedded board.
1.2 Packing List After opening the package, carefully inspect the contents. If any of items is missing or appears damaged, please contact with your local dealer or distributor. The package should contain the following items: 1 x EX-98211 Box PC 2 x EPE FOAM 1 x Accessory Box (CD/Quick Installation Guide/Screw/Cable) 1.
1.4 Power Information 1.5 I/O Ports Arrangement The EX-98211 has 4 serial ports, 6 USB (Host) ports, and 2 RJ-45 LAN ports. The arrangement of these ports is shown in Figure 1.1 & Figure 1.2 1.5.1 Front View Figure 1.1: Front View of EX-98211 1.5.2 Back View Figure 1.
1.6 Dimensions ‧ Dimension (W x H x D): 195 x 268 x 80 mm (7.68" x 10.55" x 3.15") Figure 1.3: Dimensions Chapter2 The Engine of EX-98211 2.1 Introduction The engine of EX-98211 is constructed by the combination of one PCBA board. Such a combination makes system customization feasible. Figure 2.
Figure 2.2: EX-98211 Main Board Bottom View 2.
EX-98211 Main Board Connector Setting
JRS1 RS-232/422/485 Selection JP1 LAN LED Connector
IDE1: Primary IDE Connector Connector type: One onboard 44-pin box headers, primary IDE
CFD1: Compact Flash Disk (Share IDE1) Connector type: 50-pin compact flash type I/II LPT1: Parallel Port Connector Connector type: D-Sub 25-pin female.
LAN1/LAN2 Connector (USB Port 1, 2 ~ USB Port 3, 4) Connector: This connector supports USB 2.0 x 4. Type: USB 2.0 x 4 USB1 Connector (USB Port 5, 6) VGA1: CRT Connector Connector type: D-Sub 15-pin female.
CN1: (COM1~4 +GPIO 2 In/2 Out Option RS422/485 output) IR1: Infrared (IR) Connector KBM1: PS/2 Keyboard & Mouse Connector type: external 6-pin Mini DIN connector on bracket AUDIO1: Audio Interface Port PWRIN1: DC Adapter Power Input
RS-422/485, GPIO Function Jumper Chapter 3 Maintenance Hardware Installation The EX-98211 is designed to be modular, slim and lightweight for easier maintenance. The following section describes simple hardware installations. 3.1 Remove Top Cover 1. Locate 6 screws which secure the top cover. 2. Use screw driver to remove the top cover screws. Keep the screws safelyfor later use. 3. Pull the top cover slightly upward. 3.2 Installing CPU 1. Locate 6 screws which secure the Thermal Lump. 2.
3. The processor socket comes with a screw to secure the CPU. As showing in the picture bellow, loose the screw first before inserting the CPU. 4. Place the CPU into the socket by making sure the notch on the corner of the CPU corresponding with the notch on the inside of the socket. Once the CPU has slid into the socket, lock the screw. 5. The contact area and gap between the processor and the heatsink require a thermal pad or thermal paste.
3.3 Installing Memory Module 1. Locate the 240-pin LONG DIMM sockets. 2. Align the LONG DIMM on the socket and let the notch on the LONG DIMM meet the break on socket. 3. Firmly insert the LONG DIMM into the socket. 3.4 Installing CF Card 1. Locate 2 screws which secure the Thermal Lump of South Bridge. 2. Use screw driver to remove the 2 screws. Keep the screws safely for later use.
3. Remove the Thermal Lump of South Bridge. 4. To install a Compact Flash Memory Card into the Main Board, align the notch on the card with the Compact Flash socket in the Main Board. Then firmly insert the card into the socket until it is completely seated. 3.5 Remove Bottom Cover 1. Unscrew 6 screws which secure the bottom cover. 2. Use screw driver to remove the bottom cover screws. Keep the screws safely for later use.
3.6 Installing Hard Disk Drive 1. Upside down the Box PC. Remove the Bottom Cover. 2. Locate the 4 screws on the HDD Holder Bracket. 3. Use screw drvier to remove the screws. Keep the screws safely for later use. 4. Put the HDD into the HDD Holder Bracket and screw it on.
5. Connect the SATA cable between the HDD and the Main Board. 3.7 Installing Riser Card 1. Insert PCI card into the PCI slot. 2. Locate the screw on the slot bracket. 3. Use screw driver to remove the screw. Keep the screw safely for later use.
3.8 Installing Wall-mount Bracket 1. Upside down the Box PC. Please locate the 8 screw holes on the bottom cover. 2. Match the screws on the wall-mount kit and screws onto the main unit.