User's Manual

INSTALLATION INSTRUCTIONS | 47
Install the Drivers (On the PC)
Important!
Do not click Cancel on ANY screen in the Add New
Hardware wizard.
1 When the Add New Hardware wizard starts, click
Next to
begin installing the drivers.
2 Select
Search for the best driver for your device and click
Next.
3 If you are prompted for a drive, make sure the
CD-ROM
drive
check box is checked. Click Next twice to install the
drivers.
4Click
Finish. On Windows* 98 systems, you may need to
click
Finish twice.
5 If you are prompted to restart the PC, click
No. You may be
asked to restart the PC more than once – click
No each time.
Install the Tablet Software (On the PC)
After the drivers are installed, the Intel Web Tablet Setup screen
appears.
Note: If the Intel Web Tablet Setup screen does not appear, open
My Computer on your desk top. Double-click the CD-ROM
drive, and then double-click
setup.exe.
1Click Install to begin installing the tablet software.
2 Follow the on-screen instructions to install the software.
Create a Network Code (On the PC)
1 The Setup Wizard shows several screens and asks you to
create a network code. Write down the network code in the
space provided below. You will need this network code to
set up the tablet.
For more information about creating a network code, click Help
on the Setup Wizard screen.
2 If the PC has more than one Internet connection, choose the
connection that you want to use with the tablet.
3 If you are prompted for your Internet Service Provider
(ISP) password, enter and confirm your password, and then
click
OK.
Restart Your Computer
When you complete the Setup Wizard, you will be asked to
restart your PC.
1 Click
Restart Now to complete the PC setup.
2 When the PC restarts, you may receive a Windows logon
prompt.
If this is your first time logging on, type a user name but no
password and click
OK.
3 When restart completes, you’ll see a Congratulations screen
that displays the network code you created.
Write your network code here: