User's Manual

Setup select paralled port Default: 378/IRQ7
 Paralled Port Mode
Setup paralled port mode Default: SPP
 Game/Midi port Address
Setup game/MIDI port address Default: 201/330
 Midi Port IRQ
Setup MIDI port IRQ Default: 10
6.6 Power Management Setup
 ACPI Function
Setup if use ACPI function Default: Enabled
 Video off Method
Setup video off method Default: DPMS
 Video off In Suspend
Setup when video off in suspend Default: yes
 Suspend Type
Setup suspends type Default: Stop Grant
 Modem use IRQ
Setup modem use IRQ Default: 3
 Soft-off by PWR-BTTN
Setup soft –off type Default: Instant-off
 Power on by Ring
Setup if use modem wake up Default: Enabled
 USB KB wake-up From S3
Setup if use USB keyboard wake up from S3 Default: Enabled
6.7 PnP/PCI Configurations
 Rest Configuration Data
When select enabled the BIOS restart write system
Configuration data Default: Disabled
 Resources controlled by
System resources parameter setup Default: Disabled
 PCI/VGA Palette Snoop
PCI/VGA card color setup Default: Disabled
6.8 Frequency/Voltage Control
 Auto Detect PCI C1k
Setup auto detect PCI Clock Default: Enabled
 CPU Clock
Setup CPU BUS frequency
Note: The main board auto detect CPU frequency, so you needn’t Setup
CPU frequency by you, the CPU can display normal
6.9 Load optimized Defaults
If you select this item and press enter, a dialog box appears.
You press y, and then Enter, the setup utility loads a set of fail-safe default values. These default
values are not very demanding and they should allow your system to function with most kinds of
hardware and memory chips.
Note: It id highly recommended that uses enter this option to load optimal values for accessing the
best performance.
6.10 Load optimized Defaults
If you select this item and then press enter a dialog box appears.
If you press Y, and then Enter, the setup utility loads a set of best –Performance default values
These default values are quite demanding and your system might not function properly if you are
using slower memory chips or there low-performance components.
6.11 Change Password