Desktop Board DH57JG Manual

Intel Desktop Board DH57JG Product Guide

Front Panel Header

Figure 20, C shows the location of the front panel header. Table 10 shows the pin

assignments and signal names for the front panel header.

Table 10. Front Panel Header Signal Names

Pin Description In/Out

Hard Drive Activity LED Power LED

1 Hard disk LED pull-up to +5 V

Out 2 Front panel LED+ Out

3 Hard disk active LED Out 4 Front panel LED- Out

Reset Switch On/Off Switch

5 Ground 6 Power switch In

7 Reset switch In 8 Ground

Power Not Connected

9 Power Out 10 No pin

NOTE

When connecting individual wires from your chassis front panel to the front panel

header, be sure to observe the connection polarity. Positive wires are usually

solid color and negative wires are usually white or striped.

Front Panel USB 2.0 Headers

Figure 20, D shows the location of the front panel USB 2.0 headers and Table 11

shows its pin assignments and signal names.

Table 11. USB 2.0 Header Signal Names

Pin Signal Name Pin Signal Name

1 Power (+5 V) 2 Power (+5 V)

3 D- 4 D-

5 D+ 6 D+

7 Ground 8 Ground

9 Key 10 No Connection

NOTE

Computer systems that have an unshielded cable attached to a USB port might not

meet FCC Class B requirements, even if no device or a low-speed USB device is

attached to the cable. Use a shielded cable that meets the requirements for a

full-speed USB device.