User's Manual

Intel Server Control Installation Guide
5
Red Hat Linux 7.1 Requirements
If you intend to manage a Linux file server, it must meet the following minimum requirements:
Linux Red Hat 7.1 or Red Hat Enterprise Linux AS 2.1 operating system running multiple-
processor kernel
32 MB of RAM
60 MB of available disk space
Additional Requirements for DMI-SNMP Translation
Simple Network Management Protocol (SNMP) support must be installed if you want to integrate
ISC with an SNMP-based management framework. On the managed server, you should consider
the following issues when configuring SNMP:
Community string names for SNMP Get and Set operations
Community string names for sending traps
The destination address for the management console receiving the traps
On the management console, you should consider the following issues when configuring SNMP:
Compiling the MIBs into the SNMP management consoles
Integration of ISC traps into SNMP management consoles
Console Requirements Overview
ISC Console Software can integrate into an Enterprise System Management Console or it can be
installed on a stand-alone console. The supported Enterprise System Management Consoles are:
1. H-P OpenView
Network Node Manager 6.1 for Windows NT
2. Intel
®
LANDesk
®
Server Manager 6.1
1. CA UnicenterTNG
2.4 for Windows NT
Console System requirements may be different when using one of the supported management
applications. Please refer to their installation requirements for additional information.
You can use the ISC stand-alone console to manage ISC-enabled servers without Enterprise System
Management. The ISC Console is implemented as an ActiveX
control that runs within its own
container or a third party container application (e.g., Microsoft Management Console, Internet
Explorer
v5.6, or Netscape Navigator
v6.0 with ActiveX plug-in).
Windows 2000 Console Requirements
Windows 2000 Advanced Server
Intel
®
Pentium
®
microprocessor or higher
At least 64 MB of RAM
At least 10 MB of available disk space
Microsoft Windows-compatible modem must be used if you connect to the server by modem