User's Manual

5/18/2007 v1.2 13 of 21
Appendix A. Base Model 0 Systems Configuration
All Production SKUs are base model 0 SKUs (no CPU, heatsink, memory, hard
drive or plug-in adapters are provided). Those components must be ordered
separately as Accessories from Intel or from third party vendors listed in the
Tested Hardware and Operating System List (THOL). The below table lists how
many of each component is included in the Production model 0 SKU.
NSW1U Production SKU Configuration
Component Description
Configuration
AC SKU
Configuration
DC SKU
Chassis (bezel, sheet metal, top cover, PCI
carrier)
1 1
S5000PHB Baseboard
(Dual-Core Intel® Xeon® Processor 5100
Series with 4M L2 cache, and 1066MHz and
1333MHz FSB) – CPUs not included
1 1
FH-FL Bracket with PCI-Express Riser 1 1
AC power supply (450W) 1 -
DC power supply (450W) - 1
Power Supply Filler Panel 1 1
SATA HDD Carrier
2 2
Server Deployment Toolkit (CD) 1 1
Quick Start Guide 1 1
Power cable
1
Purchase separately Purchase separately
CD-ROM Carrier
Optional Accessory Optional Accessory
PCI-X Riser
2
Optional Accessory Optional Accessory
Syscon Board
2
Optional Accessory Optional Accessory
Intel® Remove Management Module 2
2
Optional Accessory Optional Accessory
NIC Cable
2
Optional Accessory Optional Accessory
Cable Management Bracket
2
Optional Accessory Optional Accessory
Bypass Ethernet Ports
3
Optional Accessory Optional Accessory
Rack Mount Kits
4
Optional Accessory Optional Accessory
Some items above available as optional accessories as noted:
1
Refer to AC power cord accessory in section III
2
Refer to “Production Spares/Accessory List” in section IV
3
Refer to “Adding Bypass Ports” in section V
4
Refer to “Rack Mounts” in Appendix B
Note: For these SKUs to be functional, one or more of the following is
required: Power cord, CPU, Memory, Hard Drive, Operating System, Heatsinks