Intel® Dialogic® System Release 6.
Contents About This Publication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applicability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Intended Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to Use This Publication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 8.2 8.3 8.4 8.5 8.6 Media Processing- Single Media Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Signaling Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switching Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cisco Interoperability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About This Publication The following topics provide information about this publication: • Applicability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 • Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 • How to Use This Publication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 • Related Information . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Chapter 6, “Programming Libraries [and Tools]” describes the programming libraries and tools that are available in this release. • Chapter 7, “Demonstration Software” describes the demonstration programs provided in this release. • Chapter 8, “Supported Hardware” provides a list of all the hardware supported in this release. • Chapter 9, “Separately Orderable Products” describes the additional software that may be required to use certain features of this release.
Release Overview 1. 1 This chapter provides a high-level overview of the products and features that are newly supported in Intel® Dialogic® System Release 6.0 cPCI Feature Pack 1 for Windows. Products and features that are newly supported are new since Intel® Dialogic® System Release 6.0 for cPCI on Windows 2000.
– IPT4800C: 480 Channel IP Gateway w/ LBR coders, RFC2833, T.38, and Gigabit on-board data network interfaces. Up to 20% (96) of the IP channels may be used for T.38 relay. – IPT2400C: 240 Channel IP Gateway w/ LBR coders, RFC2833, T.38, and Gigabit on-board data network interfaces. Up to 20% (48) of the IP channels may be used for T.38 relay. – IPT1200C: 120 Channel IP Gateway w/ LBR coders, RFC2833, T.38, and Gigabit on-board data network interfaces.
• New H.323 Features – H.450.
System Requirements 2. 2 This chapter describes the system requirements for Intel® Dialogic® System Release 6.0 cPCI Feature Pack 1 for Windows: • Basic Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 • Basic Software Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.1 Basic Hardware Requirements Minimum Hardware Requirements The minimum hardware requirements are listed below for this release.
2.2 Basic Software Requirements The basic software requirements include: • Windows 2000 (Professional, Server, or Advanced Server) SP2 or greater, including simplified Chinese version OR • Windows Server 2003 Standard and Enterprise Editions, including simplified Chinese version • Compiler support for Developer Studio 6.0 and 7.0 System Release 6.
New Features by Product 3. 3 This chapter describes the key features for the following Intel® NetStructure™ boards supported in Intel® Dialogic® System Release 6.0 cPCI Feature Pack 1 for Windows: • New Intel NetStructure DMT160TEC Board . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 • New Intel NetStructure IPT10000C IP Board . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 New Intel NetStructure IPT10000C IP Board This release introduces support for the Intel® NetStructure™ IPT10000 IP board. This board supports 1000 Voice-over-IP G.711 ports, extending the density range of the IPT family of boards from 120 to 1000 ports. The Intel NetStructure IPT10000 IP board is a new board that was not supported previously in Intel Dialogic System Release 6.0 for cPCI on Windows 2000.
3.5 New Features for Intel Netstructure DM/IP Series Products The Intel® NetStructure™ DM/IP platform offer zero, one, or two T1 or E1 spans plus VoIP and media processing in a single-slot solution. These DM/IP Series products are ideal for larger enterprise and carrier-grade IP media gateway solutions. They support the H.323 and SIP IP telephony standards, as well as traditional APIs from Intel including R4 and Global Call. Note: DM/IP products do not support Continuous Speech Processing (CSP).
• Setting DTMF transfer mode on a per call basis • IP Precedence ToS (ToS byte) • Multicast • Interoperable with CISCO 5300 running IOS 12.3(1) 3.6 New Features for Intel NetStructure DM/V and DM/VA Boards The Intel® NetStructure™ DM/V and DM/V-A boards are based on the DM3 architecture. DM/V-A boards provide enhanced media in addition to 0, 2 or 4 trunks. DM/V boards provide basic voice in addition to 4 trunks. Both boards provide voice processing on a single-slot cPCI chassis.
3.7 New Features for Intel NetStructure IPT Series Products The Intel® NetStructure™ IPT Series boards provide carrier-grade, open, standardsbased platforms that offer a highly scalable, flexible, carrier-grade solution for IP telephony gateways and media servers. The boards provide IP services, enabling the optimal utilization of the next generation network (NGN) architecture.
Installation and Configuration 4. 4 This chapter provides information about the installation and configuration of Intel® Dialogic® System Release 6.0 cPCI Feature Pack 1 for Windows. This information is provided in the following sections: • Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 • Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4.
For more information about installing and uninstalling Intel Dialogic System Release 6.0 cPCI Feature Pack 1 for Windows, refer to the Intel Dialogic System Release 6.0 cPCI Feature Pack 1 for Windows Software Installation Guide for this release. Online help is also available during the installation process. 4.2 Configuration This chapter describes the configuration software capabilities that are supported in Intel Dialogic System Release 6.0 cPCI Feature Pack 1 for Windows.
OA&M Software 5. 5 This chapter provides the OA&M software features supported in Intel® Dialogic® System Release 6.0 cPCI Feature Pack 1 for Windows. This information is organized into the following sections: • Administration Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 • Diagnostics Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5.
Improved debugging capabilities Intel® Telecom Subsystem Summary Tool (its_sysinfo) is a single utility that collects a complete system of diagnostic information designed for users without a telephony background.
Programming Libraries [and Tools] 6. 6 This chapter describes the features of the programming libraries and other development software features and tools that are supported in Intel® Dialogic® System Release 6.0 cPCI Feature Pack 1 for Windows. The development software is divided into the following categories: • Audio Conferencing API Library (DCB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 • CSP (Continuous Speech Processing) API Library . . . . . . . . . . . . . . . . . . . . .
cancellation, voice energy detection, barge-in, voice event signaling, pre-speech buffering, and full-duplex operation. The CSP software includes library functions, device drivers, firmware, and demonstration programs. Note: Refer to the Continuous Speech Processing API Programming Guide and Continuous Speech Processing API Library Reference for more information. New Features No new Continuous Speech Processing (CSP) features have been implemented since Intel® Dialogic® System Release 6.
New Features The Global Call API library supports the following new features for the IP technology: T.38 gateway support (on Intel NetStructure DM/IP boards only) Support for SIP-T SIP Telephony (SIP-T) information may be sent and received via MIME-encoded messages . The embedded information is handled as raw data. H.450.2 Call Transfer The library provides full support for blind and supervised call transfers between endpoints on the same virtual board Access to Facility IE The Facility IE in H.
Ability to retrieve RTP addresses Both local and remote RTP addresses, which include the port number as well as the IP address, can be retrieved when a connection events is received The Global Call API library supports the following new features for the ISDN technology: Alarm handling for DM3 boards Global Call Alarm Management System (GCAMS) support for the management of alarms on DM3 boards Dynamic configuration of the D-channel at runtime The ability to enable or disable the D-channel at runtime Dynamic
New Features No new IP Media (IPML) features have been implemented since Intel® Dialogic® System Release 6.0 for cPCI on Windows 2000. 6.6 Modular Station Interface API The Modular Station Interface (MSI) API is used by Intel® NetStructure™ High Density Station Interface (HDSI) boards, which provide high density analog station connectivity. The HDSI board can support up to 120 stations with tone detection and generation, and FSK Caller ID transmission.
New Features The Voice API library provides the following new features in this release. 8K linear coder Ability to play and record using linear PCM at 8 kHz with 8-bit samples (64 kbps) and 8 kHz with 16-bit samples (128 kbps) linear coding, VOX and WAVE file formats. Coders are specified using the DX_XPB structure. ETSI-compliant FSK Support for sending and receiving two-way frequency shift keying (FSK) data, compliant with European Telecommunications Standards Institute (ETSI).
Demonstration Software 7. 7 Demonstration programs are provided to demonstrate the functionality and features of Intel® Dialogic® and Intel® NetStructure™ products and serve as examples of application programming using Intel® Dialogic® API libraries. All demo programs are supplied as source code which users may modify to explore other capabilities of the products.
from the software. It uses the RH APIs from Pigeon Point for the ZT5085 chassis as well as the NCM API. Note: For more information about this demo program, refer to the High Availability Demo Guide. 7.2 Updated Demo Programs There are no demo programs that have been updated, modified or enhanced since Intel Dialogic System Release 6.0 for cPCI on Windows 2000. 7.3 Other Supported Demo Programs The following demo programs continue to be supported in this release.
• Global Call API Library • Event Service API Library • Native Configuration Manager API Library • Standard Runtime API Library Note: For more information about this demo program, refer to the High Availability Demo Guide.
Supported Hardware 8. 8 This chapter lists the hardware products that are supported in Intel® Dialogic® System Release 6.0 cPCI Feature Pack 1 for Windows. It is important to note that this release supports all the same boards as the previous Intel® Dialogic® System Release 6.0 for cPCI on Windows 2000 product along with some additions. The following Intel® NetStructure™ boards are supported in this release: • Media Processing - Combined Media Boards . . . . . . . . . . . . . . . . . . . . . . . . .
8.1.2 Voice with Speech and Conferencing Intel® NetStructure™ Voice with Speech and Conference boards include the following: • DMV480A2T1CR2 • DMV600A2E1CR2 • DM/V960A-4T1-cPCI (conference and voice mutually exclusive) • DM/V1200A-4E1-cPCI (conference and voice mutually exclusive) • DMV960A4T1CR2 (conference and voice mutually exclusive) • DMV1200A4E1CR2 (conference and voice mutually exclusive) • DM/V480A-2T1-cPCI • DM/V600A-2E1-cPCI 8.
8.3.1 Digital Telephony Interface Boards Intel® NetStructure™ Digital Interface Boards include the following: • DMN160TEC • DM/N960-4T1-cPCI • DM/N1200-4E1-cPCI • DMT160TEC • DM/T960-4T1-cPCI • DM/T1200-4E1-cPCI 8.3.2 IP Boards The Intel® NetStructure™ IP Boards include the following: • DM/IP481-2T1-cPCI-100BT • DM/IP601-2E1-cPCI-100BT • DM/IP601-cPCI-100BT • IPT1200C • IPT2400C • IPT4800C • IPT6720C • IPT10000C 8.
8.5 Cisco Interoperability All IP Protocols included in Intel® Dialogic® System Release 6.0 cPCI Feature Pack 1 for Windows shall interoperate with the following Cisco configuration: Cisco Model AS5300 IOS, Version 12.3. 8.6 Obsolete Products The following products discontinued for future releases, but are still supported in Intel® Dialogic® System Release 6.0 cPCI Feature Pack 1 for Windows. • DM/V480A-2T1-cPCI • DM/V600A-2E1-cPCI • DM/V960A-4T1-cPCI • DM/V1200A-4E1-cPCI System Release 6.
Separately Orderable Products 9. 9 This section describes separately orderable products that are not part of Intel® Dialogic® System Release 6.0 cPCI Feature Pack 1 for Windows, but are required to perform some of the functions supported by the system release. • Global Call Protocols Package version 4.2 The Global Call Protocols provides analog and E1/T1 CAS/R2 protocols for a variety of countries and switches on Intel® NetStructure™ and Intel® Dialogic® boards.
Documentation 10. 10 This chapter provides information about the documentation that has been developed to accompany the Intel® Dialogic® System Release 6.0 cPCI Feature Pack 1 for Windows release. This information is organized into the following sections: • System Release Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 • Installation and Configuration Documentation . . . . . . . . . . . . . . . . . . . . . . . . . 34 • OA&M Software Documentation . . . . . . . . . .
10.3 OA&M Software Documentation The following operation, administration and maintenance documentation is provided to support this release: • Intel Dialogic System Release 6.
Fax • Fax Software Reference † IP Media • IP Media Library API Programming Guide • IP Media Library API Library Reference † Modular Station Interface • Modular Station Interface API Programming Guide † • Modular Station Interface API Library Reference † Standard Runtime Library • Standard Runtime Library API for Windows Programming Guide • Standard Runtime Library API Library Reference Voice • Voice API for Windows Programming Guide • Voice API for Windows Library Reference Note: A dagger (†) next to a
10.6 Online Help The following online help is provided to support this release: • DCM Help • Install Help System Release 6.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
