User's Guide

26
OW70L-Dac - OneWeb LEO User Terminal
4.7 Connecting Cable to Antenna
NOTE
Make sure the followings before installing system cables.
1. All cables need to be well clamped and protected from physical damage and exposure to
heat and humidity.
2. Don't use any acutely bent cable.
4.7.1 Connecting Cable to Primary Antenna
Connect the MoCA Cable from the MoCA port of the CNX to the Power & Data connector on the bottom of
the primary antenna radome.
Figure 12: Cable Connection of CNX to Antenna
NOTE
To connect the primary antenna to CNX, use the 30-m long MoCA cable (RG6) supplied in the
installation kit. The maximum cable length recommended is 30 m for RG6 cable and 100 m for
RG11 cable. Separate purchase of cable is required if you need a longer cable connection.
Power & Data
connector
Power + Data
Above Decks
Below Decks
MoCA
CNX
Primary Antenna