User's Guide

40
OW70L-Dac - OneWeb LEO User Terminal
7.6.6 RF Cable Setup
Intellian provides the Antenna RF Cables (LMR400, 5 m) as default. Choose the LMR 400 on the IF Cable
Type and the 5 on the IF Cable Lenght(m) from the drop-down list. Click on Submit.
NOTE: The RF cable type and length value must be the same as the RF cable being used.
7.6.7 TILT Calibration
The Tilt Calibration must be applied to both the primary and secondary antennas. Choose the Primary/
Secondary on the Select Antenna and select the Start Calibration on the TILT Calibration Action from
the drop-down list. If you select the Stop on the TILT Calibration Action and Click the Sumit, the antenna
system will stop the tilt calibration.
Click on Submit, then click on Next. The antenna system will start the tilt calibration.
7.6.8 GNSS Configuration
GNSS Configuration page has multiple forms which you can specify the: Cable Delay, Field of View,
Constellation, and the Timing Mode. Click on Submit, then click on Next.
Primary