User's Guide

Using Local User Interface (LUI)

7.6.9 Configure Blockage Zones

This page allows you to configure blockage zones for an antenna id. Clicking on Add more blockagezones

will add another blockage zone to configure.

• Azimuth values must be between 0 and 360.

• Elevation values must be between 0 and 90.

Click on Submit, then click on Next.

7.6.10 Antenna Leveling

The antenna leveling page displays the current sensor data received from the antenna. The “Tilt Pitch:

degrees” and “Tilt Roll: degrees” are displayed. If the degree values meet the tolerance, the card for the

corresponding antenna is outlined in Green; otherwise, it is outlined in Red. Click on Next.