User's Guide

48
OW70L-Dac - OneWeb LEO User Terminal
10.3 Appendix C. Installing Heating Device
The heating device kit can be purchased separately. In order to install and operate the heating devices
successfully, a thorough review of this document is strongly recommended.
1. Safty Precautions
The following safety precautions must be observed during operation. Intellian has no liability for the
customer’s failure to comply with these requirements.
WARNING: HAZARDOUS VOLTAGE WARNING: HOT SURFACE
2. Installing Heating Device
1. Remove M5 x 20L Hex Wrench bolt (10 ea) using a 4-mm hexagonal wrench. Detach the radome hatch
from the radome bottom.
Detach
Radome Hatch
NOTE
DO NOT reuse the removed bolts.
2. Assemble the heating device assembly to the radome hatch position using a M5 x 20L Hex Wrench bolt
(10 ea). Fasten the bolt using a 4-mm hexagonal wrench.
Assemble Heating
Device Assembly