Network Card User Manual

10 Intel EtherExpress PRO/100+ TX PCI LAN Controller User’s Guide
•
Test the adapter by running diagnostics in Setup. Additional testing
is available by using a responder (see the next section).
•
Check the readme files.
Responder Testing on the Network (Optional)
Setup can test the OBEC more thoroughly if there is a responder on the
network while you run the tests.
1.
Go to a computer on the network with a comparable PCI adapter
installed.
2.
Run the appropriate configuration program for the installed adapter
and set it up as a responder.
3.
Return to the computer with the new adapter. Run Setup and test the
adapter.
NetWare Server, Client 32, UNIX, OS/2,
Banyan, and Other Operating Systems
Refer to Intel’s online documents. On a DOS computer, view the
appropriate readme file for information on installing your network driver.
1.
To view the readme files, insert the Configuration and Drivers disk
into a drive, switch to that drive, and type:
SETUP /README
E
NTER
Refer to
Installing Adapter Drivers
for the operating system you need.
Testing with a Responder on the Network
ENet2.book Page 10 Monday, May 4, 1998 9:53 AM