User's Manual
Table Of Contents
- Contents
- Hardware Installation
- Software Supplied
- Hardware Installation
- Unpacking and Inspection
- Other Required Equipment
- Installing Card and Cables
- PRO/100 Modem and Ethernet Connections
- Windows* 95 Installation
- Which Version of Windows 95?
- How Can I Tell Which Version I Have?
- Additional Information in this Chapter
- Windows 95 Installation (Retail Version)
- Windows 95 OSR2 Installation (OEM Version)
- How to Install for Windows 95 and NetWare*
- Utilities
- Power-Saving Modes
- Windows 95 Troubleshooting
- Troubleshooting Checklist
- Windows 95 Driver Parameters Reference
- Windows NT Installation
- Which Version of Windows NT?
- How Can I Tell Which Version and Service Pack I Have?
- Additional Information in this Chapter
- Windows NT 4.0 Installation
- Windows NT 3.51 Installation
- Power-Saving Modes
- Utilities
- Windows NT Driver Parameters Reference
- Windows 3.x/DOS Installation
- Installation under MS-DOS
- Windows 3.x Network Driver Parameters
- ODI Settings (for M16BODI.COM)
- Error Messages for Windows 3.x and MS-DOS Drivers
- Windows 3.x Troubleshooting
- Computer-Specific Application Notes (Windows 3.x)
- Utilities and Applications
- Utilities
- Country Identifier Utility
- Modem Test Utility
- Diagnostic Test Utility (M16BTEST.EXE)
- COM port monitor (Windows 3.x only)
- Communications Application Notes and Modem
- Modem Reference
- Result Codes
- AT Command Reference
- S-Register Reference
- Automated Customer Support
- Specifications
- Agency Notices
- Software License Agreement
- Index
Utilities and Applications 5-15
4 Click User Preferences.
5 Click the Ports icon.
6 Under Communications Ports.
a Select the appropriate protocol if connecting via the network.
b If connecting over the modem .
Select the correct COM port.
Click in the Port Enabled box.
7 If connecting over modem, click COM# Options,.
a Under Modem type, verify EtherExpress PRO/100
LAN+Modem PC Card is listed.
b Verify that the Maximum port speed is set to 115.2Kbps.
c Use the default initialization string. .
d Click OK to save changes and exit.
Lotus Notes version 4.11A with Windows 95 and NT
4.0
To set up the Intel modem or modify the present configuration:
1 Copy the M16BLOT.MDM file to the default directory where Lotus
Notes program is installed. \NOTES\DATA\MODEMS
2 In the Lotus Notes Desktop screen, click File.
3 Click Tools.
4 Click User Preferences....
5 Click the Ports icon.
6 Under Communications Ports.