Datasheet

Datasheet 25
Electrical Specifications
NOTES:
1. The loadline specification includes both static and transient limits except for overshoot
allowed as shown in Section 3.7.3.
2. This table is intended to aid in reading discrete points on Figure 2.
3. The loadlines specify voltage limits at the die measured at the VCC_SENSE and
VSS_SENSE pins. Voltage regulation feedback for voltage regulator circuits must be taken
from processor VCC and VSS pins. Refer to the Intel(R) IMVP-6 Mobile Processor Voltage
Regulation Specification for socket loadline guidelines and VR implementation details.
4. Adherence to this loadline specification is required to ensure reliable processor operation.
NOTES:
1. The loadline specification includes both static and transient limits except for overshoot
allowed as shown in Section 3.7.3.
2. This loadline specification shows the deviation from the VID set point.
Table 6. V
CC
Static and Transient Tolerance
I
CC
(A)
Voltage Deviation from VID Setting (V)
1, 2, 3, 4
5.80 mΩ
Maximum Voltage Typical Voltage Minimum Voltage
0 0.050 0.000 -0.050
2 0.038 -0.012 -0.062
4 0.027 -0.023 -0.073
6 0.015 -0.035 -0.085
8 0.004 -0.046 -0.096
10 -0.008 -0.058 -0.108
12 -0.020 -0.070 -0.120
14 -0.031 -0.081 -0.131
16 -0.043 -0.093 -0.143
18 -0.054 0.104 -0.154
20 -0.066 -0.116 -0.166
22 -0.078 -0.128 -0.178
24 -0.089 -0.139 -0.189
Figure 2. V
CC
Static and Transient Tolerance