User manual

47
Software Installation
11 Delete the old Intel configuration files from the Windows system
directory.
12 Restart Windows.
13 Follow the instructions for installing drivers for Windows for
Workgroups alone or Windows for Workgroups and NetWare.
Novell NetWare
ODI Driver
The Intel ODI driver allows for the concurrent use of Novell NetWare and
other protocols that support Novell’s Open Data-Link Interface (ODI)
specification.
NetWare
1 Run the Intel Installation Program from the Installation Disk.
2 Choose Novell NetWare from the Select Network Operating System
screen.
3 Follow the prompts to complete the installation.
4 The Intel Installation Program will reboot the computer and verify the
NetWare connection.
5 Log in to the network.
NOTE:
The Intel Installation Program uses the NetWare VLM shell to connect to your
NetWare server. The Installation Program decompresses and copies all the
required files.
If you are installing manually, without the Intel Installation Program (under MS-
DOS or Windows 3.x) you must first decompress the VLM files by running the
MS-DOS batch file DCOMPVLM.BAT from the Network Drivers Disk, as follows:
DCOMPVLM [ PATH ]
where [ path ] is the directory for NetWare files (usually C:\NWCLIENT).
DCOMPVLM will decompress and copy all required files to the designated direc-
tory.
If you need NETX shell support, contact your System Administrator.