Security Camera User Manual

NSC2U Base Model 0 Configuration:
All Production SKUs are base model 0 SKUs (no processor, heatsink, memory, hard drive,
power cord, operating system, or plug-in adapters are provided). Those components must
be ordered separately as Accessories from Intel or from third party vendors listed in the
Tested Hardware and Operating System List (THOL).
The table below lists which components are included in the base model 0 SKUs and which
ones must be ordered separately or as optional accessories.
Component Description
AC Mod 0
Configuration
DC Mod 0
Configuration
AC power supply (600 W) 1 included -
DC power supply (600 W) - 1 included
Filler Panel in 2
nd
power supply bay 1 included
Chassis (bezel, sheet metal, top cover, PCI carrier) 1 included
Server Board T5000PAL 1 included
Bezel (gray) 1 included
PCI Riser FH-FL (two PCI-Express and one PCI-X slots) 1 included
PCI Riser LP (two PCI-Express slots) 1 included
FB-DIMM slots (memory not included) 8 included
Trays for hot-swap 2.5” SAS Hard Disk Drives 6 included
Filler Panel in optical device bay 1 included
Rear Panel GbE NIC (Cu) ports (via Server Board) 2 included
Server Deployment Toolkit (CD) 1 included
Quick Start Guide 1 included
Power Cable Purchase separately
1
SW RAID 0/1/10 Included
HW RAID 5 Optional Accessories
2
Intel® Z-U130 Value Solid State Drive Optional Accessory
2
Mounting kit for Intel® Z-U130 Value Solid State Drive Optional Accessory
2
Remote Management Module 2 Optional Accessory
2
PCI-X FH-FL Riser (3 PCI-X slots) Optional Accessories
2
Ethernet I/O Module (dual Gigabit rear ports) Optional Accessory
2
SAS I/O Expansion Module (x4 external rear port) Optional Accessory
2
Rack Mount Kits Optional Accessory
4
Processor (refer to “Details on Ordering Processors”) Purchase separately
5
Heatsink Accessory or purchase separately
Memory Purchase separately
5
Hard Disk Drive Purchase separately
5
Optical Drive Purchase separately
5
Accessories for NIC-in-Front Capability
3
Quad Port Bypass Adapter (Copper) Optional Accessory
3
Quad Port Bypass Adapter (Fiber) Optional Accessory
3
Quad NIC-in-Front Mounting Kit (Copper) Optional Accessory
3
Quad NIC-in-Front Mounting Kit (Fiber) Optional Accessory
3
1
Refer to AC power cord accessory in this section
2
Refer to “Production Spares/Accessories List” in section III
3
Refer to “Quad Port Bypass NIC Capability” in section IV
4
Refer to “Rack Mounting Options” in the Appendix
5
Should be purchased separately (parts not listed in this document)
3/28/2008 v 2.2 6 of 20