Manualshelf

Intel Pentium 4 Processor on 90 nm Process

ManualsBrandsIntel ManualsOtherIntel Pentium 4 Processor supporting HT Technology 3.00E GHz, 1M Cache, 800 MHz FSB
21222324252627282930
26 Datasheet
Electrical Specifications
NOTES:
1. The loadline specification includes both static and transient limits except for overshoot allowed as shown in
Section 2.11.
2. This loadline specification shows the deviation from the VID set point.
3. The loadlines specify voltage limits at the die measured at the VCC_SENSE and VSS_SENSE pins. Voltage
regulation feedback for voltage regulator circuits must be taken from processor VCC and VSS pins. Refer to
the Voltage Regulator-Down (VRD) 10.0 Design Guide for socket loadline guidelines and VR implementation
details for 478_VR_CONFIG_B.
Figure 3. V
CC
Static and Transient Tolerance for Loadline B
VID - 0.000
VID - 0.025
VID - 0.050
VID - 0.075
VID - 0.100
VID - 0.125
VID - 0.150
VID - 0.175
VID - 0.200
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75
Icc [A]
Vcc [V]
Vcc
Typical
Vcc
Maximum
Vcc
Minimum