Intel Pentium 4 Processor Extreme Edition on 0.13 Micron Process in the 775-Land Package Datasheet

Datasheet 23
Electrical Specifications
Table 2-6. V
CC
Static and Transient Tolerance
Icc (A)
Voltage Deviation from VID Setting (V)
1, 2, 3, 4, 5
NOTES:
1. The loadline specification includes both static and transient limits except for overshoot allowed as shown in
Section 2.12.
2. This table is intended to aid in reading discrete points on Figure 2-1.
3. The loadlines specify voltage limits at the die measured at the VCC_SENSE and VSS_SENSE lands. Voltage
regulation feedback for voltage regulator circuits must be taken from processor VCC and VSS lands. Refer
to the Voltage Regulator-Down (VRD) 10.1 Design Guide for Desktop and Transportable Socket 775 for sock-
et loadline guidelines and VR implementation details.
4. Adherence to this loadline specification for the processor is required to ensure reliable processor operation.
5. Loadline information: Vccmin = 1.45 mΩ, Vccmax = 1.40 mΩ, Tolerance = ±19 mV, Nominal design set point
= VID - Tolerance.
Maximum Voltage Typical Voltage Minimum Voltage
0 A 0.000 V -0.019 V -0.038 V
10 A -0.014 V -0.033 V -0.053 V
20 A -0.028 V -0.048 V -0.067 V
30 A -0.042 V -0.062 V -0.082 V
40 A -0.056 V -0.076 V -0.096 V
50 A -0.070 V -0.090 V -0.111 V
60 A -0.084 V -0.105 V -0.125 V
70 A -0.098 V -0.119 V -0.140 V
80 A -0.112 V -0.133 V -0.154 V
90 A -0.126 V -0.147 V -0.169 V
100 A -0.140 V -0.162 V -0.183 V
110 A -0.154 V -0.176 V -0.198 V
120 A -0.168 V -0.190 V -0.212 V