Intel Pentium 4 Processor Extreme Edition on 0.13 Micron Process in the 775-Land Package Datasheet

Datasheet 79
Boxed Processor Specifications
7 Boxed Processor Specifications
The Pentium 4 processor Extreme Edition in the 775-land package will also be offered as an Intel
boxed processor. Intel boxed processors are intended for system integrators who build systems
from baseboards and standard components. The boxed Pentium 4 processor Extreme Edition in the
775-land package will be supplied with a cooling solution. This chapter documents baseboard and
system requirements for the cooling solution that will be supplied with the boxed Pentium 4
processor Extreme Edition in the 775-land package. This chapter is particularly important for
OEMs that manufacture baseboards for system integrators. Figure 7-1 shows a mechanical
representation of a boxed Pentium 4 processor Extreme Edition in the 775-land package.
Note: Unless otherwise noted, all figures in this chapter are dimensioned in millimeters and
inches [in brackets].
Note: Drawings in this section reflect only the specifications on the Intel boxed processor product. These
dimensions should not be used as a generic keep-out zone for all cooling solutions. It is the system
designer’s responsibility to consider their proprietary cooling solution when designing to the
required keep-out zone on their system platforms and chassis. Refer to the Intel
®
Pentium
®
4
Processor Extreme Edition on 0.13 Micron Process in the 775-land package Thermal Design
Guide.
NOTE: The airflow of the fan heatsink is into the center and out of the sides of the fan heatsink.
Figure 7-1. Mechanical Representation of the Boxed Processor