Voltage Regulator-Down (VRD) 10.1 Design Guide

Processor Vcc Requirements
R
16 Design Guide
Figure 2-2. Socket Load Line Window for Design Configuration 775_VR_CONFIG_04B
-0.16 V
-0.14 V
-0.12 V
-0.10 V
-0.08 V
-0.06 V
-0.04 V
-0.02 V
0.00 V
0 A 20 A 40 A 60 A 80 A 100 A 120 A
Vmax Load Line Vtyp Load Line Vmin Load Line
NOTES:
1. Presented as a deviation from VID.
2. Socket load line Slope = 1.0 mΩ, TOB = ±19 mV
3. Consult Table 2-1 for maximum current values
Table 2-4. Socket Load Line Window for Design Configuration 775_VR_CONFIG_04B
Icc Maximum Typical Minimum
0 A 0.000 V -0.019 V -0.038 V
20 A -0.020 V -0.039 V -0.058 V
40 A -0.040 V -0.059 V -0.078 V
60 A -0.060 V -0.079 V -0.098 V
80 A -0.080 V -0.099 V -0.118 V
100 A -0.100 V -0.119 V -0.138 V
120 A -0.120 V -0.139 V -0.158 V
NOTES:
1. Presented as a deviation from VID.
2. Socket load line Slope = 1.0 mΩ, TOB = ±19 mV
3. Consult Table 2-1 for maximum current values