Specifications
Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
35
4.2.2 1U 8 x 2.5” – R1208WTxxx SAS / SATA Data Cable Guide
Note: For data cable information associated with Intel® Accessory Kit A2U44X25NVMEDK, see section 5.1.1
System
Configuration
Drive Support
Cables for On-board
Multi-port SATA
Ports to Backplane
Cables for
Mezzanine 12 Gb
SAS ROC Module to
Backplane
Cables for
Mezzanine 6 Gb SAS
RAID module to
Backplane
Cables for 12 Gb SAS
RAID PCIe* add-in card
to Backplane
Cables for 6 Gb SAS
RAID PCIe* add-in card
to Backplane
R1208WTxxx
R1208WTTGS
R1208WT2GS
8 x 2.5”
12 Gb SAS capable
Cable Connections:
SATA -> BP 0-3
730 mm HR --- HD
sSATA -> BP 4-7
800 mm HR --- HD
From data above, select
appropriate cable kits
from list below:
AXXCBL1UHRHD
1 of each cable
included with L6
Integrated systems
Cable Connections:
SAS Mezz -> BP 0-3
650 mm HD --- HD
SAS Mezz -> BP 4-7
800 mm HD --- HD
From data above,
select appropriate
cable kits from list
below:
AXXCBL650HDHD
AXXCBL800HDHD
Cable Connections:
SAS Mezz -> BP 0-3
650 mm HD --- MS
SAS Mezz -> BP 4-7
800 mm HD --- MS
From data above, select
appropriate cable kits
from list below:
AXXCBL650HDMS
AXXCBL800HDMS
From Riser #1
Cable Connections:
SAS PCIe -> BP 0-3
650 mm HD --- HD
SAS PCIe -> BP 4-7 **
730 or 800 mm HD --- HD
From Riser #2
Cable Connections:
SAS PCIe -> BP 0-3 **
650 or 730mm HD --- HD
SAS PCIe – BP 4-7 **
800 or 875 mm HD --- HD
From data above, select
appropriate cable kits from
list below:
See ** notes below
AXXCBL650HDHD
AXXCBL730HDHD
AXXCBL800HDHD
AXXCBL875HDHD
From Riser #1
Cable Connections:
SAS PCIe -> BP 0-3
650 mm HD --- MS
SAS PCIe -> BP 4-7 **
730 or 800 mm HD --- MS
From Riser #2
Cable Connections:
SAS PCIe -> BP 0-3 **
650 or 730mm HD --- MS
SAS PCIe – BP 4-7 **
800 or 875 mm HD --- MS
From data above, select
appropriate cable kits from
list below:
See ** notes below
AXXCBL650HDMS
AXXCBL730HDMS
AXXCBL800HDMS
AXXCBL875HDMS
** 1 or 2 cable lengths may be specified for a PCIe add-in card. Generally, if the cable connector of the add-in card is located on the back edge of the card, a shorter
cable is specified. Cable connectors on the top edge or near the front of the add-in card will require the longer cable length.